Take the 2-minute tour ×
Raspberry Pi Stack Exchange is a question and answer site for users and developers of hardware and software for Raspberry Pi. It's 100% free, no registration required.

I purchased this 3.5" display from Adafruit (https://www.adafruit.com/products/913).

However, I am a complete hardware noob. Am I suppose to solder the 2 wires not attached RCA connectors to the RasPi board? How to connect it to rasppi ?

Any help (and patience) would be greatly appreciated.

share|improve this question
add comment

1 Answer 1

You should be able to just connect the RCA output on the Raspberry Pi (the yellow connector on the board) with one of the yellow RCA connectors on the display. You will need an RCA cable like this one Adafruit RCA Cable.

As the description says, if one RCA connection doesn't work be sure to try the other.

share|improve this answer
    
Thanks a lot and what about power of the display ? –  danmir Jan 31 '13 at 17:17
1  
I think you'll need to attach the red and black wires that are on your main cable with the RCA connections to a 6V\12V DC power supply. This adapter should help: adafruit.com/products/368 with this power supply I think adafruit.com/products/798. –  tkeE2036 Jan 31 '13 at 17:28
    
I'm a little unsure on the power supply portion of this assembly, maybe someone else could chime in and confirm what I've said? –  tkeE2036 Jan 31 '13 at 17:32
    
Looks right to me, but before purchasing I would email Adafruit. –  HeatfanJohn Jan 31 '13 at 18:03
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.