A connection describes a link between two systems where data can be exchanged.

learn more… | top users | synonyms

0
votes
0answers
38 views

Share WiFi connection through ethernet

Using kali linux for this. I went into the "Network Connections" and created a new connection under "Wired" and set it to "Shared to other computers" under the "IPv4" tab and it doesn't work. When I ...
0
votes
0answers
29 views

Usb_modeswitch doesnt seem to work in raspberry pi b+

I just purchased a raspberry pi b+. I want to connect to the internet using a 3g dongle (huawei ec152). I followed ...
1
vote
0answers
26 views

Connection refused when I try to connect my pc to raspberry pi via internet bridge

Hi guys I'm trying to connect the raspberry pi to a pc via internet bridge. I have a rj45 port free (eth0): so I've set these settings: Ipv4 Settings: Method Shared with other computers Ipv6 ...
1
vote
0answers
22 views

Ethernet connectivity issues. My fault or the pi's?

I've had ethernet working on my raspberry pi before, but then I switched to using it as a media center and had no need for it. Now I'm switching back and when I plug the cable from my router to the ...
0
votes
0answers
29 views

raspberry pi start without boot up files

can raspberry pi python start application automatically when power up raspberry pi ???? i don't want to see the boot up files in starting is there any way to start the program directly without boot ...
0
votes
1answer
109 views

Connect Raspberry Pi to MacBook air over USB ethernet adapter and use the WiFi connection on the Mac

My setup = Raspberry pi + Keybaord + Mouse, connected to a MacBook air via a USB Ethernet adapter. On the MacBook air, internet sharing is on to allow the USB Ethernet device use the WiFi connection ...
0
votes
1answer
81 views

Connect an LCD with Ribbon Cable to Breadboard

I've purchased these two display modules, however, I am lacking the right connectors so that I can connect to my breadboard and to Pi. I would like to know what hardware I should purchase for this ...
0
votes
1answer
43 views

The internet on Raspbmc turns off automatically since about a month. How can I fix this?

I'm using the latest stable build of Raspbmc on my Raspberry Pi Model B 512 MB. I'm using a phone charger, 5V, 700mA as a power supply. The Raspberry Pi is connected to the internet with a normal ...
0
votes
0answers
17 views

Networks connection lost

I'm having a bit of trouble using Raspbmc. If I watch video from my NAS (synology) and pauses it for a short while (aproximately half an hour) it says network connection is lost when I hit play. Both ...
0
votes
2answers
224 views

No signal on TV and Computer Monitor

I'm trying to get my Raspberry to work on my TV screen and on my computer monitor, however, Whenever I connect through HDMI with my screen I get No Signal. I used to get this sometimes and by ...
0
votes
2answers
115 views

How to connect my RaspBerry Pi directly to my PC using ethernet cable? Don't work

I am trying to install\configure RaspBian on my new RaspBerry Pi in headless way. So I have wrote the RaspBian distro on the SD using the dd Linux statment and I am following this tutorial to connect ...
0
votes
1answer
91 views

How to connect the connect to a PiHUB?

I just got my PiHUB but there are no instructions on how to use it :( I need: To connect it to 3 USB devices, The USB devices need to be controlled by 1 Rpi, That Rpi would (preferably) be powered ...
0
votes
0answers
67 views

Raspberry Pi as router with Firestarter

I have rpi that serves as router with dhcp and apache with simple html serving as a captive portal...how can I configure firestarer to use my own isc dhcp server instead of his own for internet ...
0
votes
0answers
59 views

How to bridge so that a dhcp wlan0 AP can use internet access over static eth0?

I connected my headless Pi to my Router (which is providing internet access) and setup a static IP address on my Pi's eth0 and access it on eth0 via SSH. I plugged an Edimax EW-7811Un WLAN adapter ...
0
votes
0answers
113 views

Connecting the raspberry pi to internet via WIFI

I am trying to connect my pi I tried many tutorials still no internet access these steps are already done pi@raspberrypi ~ $ sudo iwconfig wlan0 essid My_routers_ID pi@raspberrypi ~ $ sudo iwconfig ...
2
votes
2answers
347 views

RPI can't connect to internet

I'm trying to ssh from my mac to my pi but when ssh'ing terminal returns "operation timed out". ifconfig on the Pi returns 192.168.1.10, but when I ping to that IP I get 100% packet loss. I've ...
0
votes
1answer
311 views

Simulated unplugging of Huawei E220 USB modem

I found out that my 3G modem keeps closing the connection every couple hours. I tried to set up a reset script, everything works fine and I know how to do it, with one little problem: The only way ...
0
votes
1answer
2k views

“connect: Network is unreachable” on a working wlan0 (connected) interface

So, I finally managed to make wlan0 (Edimax EW-7811Un usb wifi dongle) connect to my router, but after get-update I discovered that Raspberry can't see network outside. My raspberry is running on ...
1
vote
1answer
176 views

8x8 matrix of buttons

It is possible to connect 8x8 matrix of buttons to the Pi using 16 GPIO pins, 8 for rows and 8 for columns? What are possible alternatives of doing this?
0
votes
2answers
1k views

SSH connection fails with fresh install of XBian and XBMC

My problem is that I have a fresh installation of XBian and XBMC but I cannot connect to the RPi via SSH from a Windows 7 PC in the same network. The router recognizes the RPi (I got the IP) but any ...
0
votes
0answers
38 views

What cables do i need?

I have looked at SainSmart 3.2" TFT LCD Display+Touch Panel+PCB adapter SD Slot for Arduino 2560 and it tells me it is compatable with raspberry pi but it dosent tell me what cables i need or how to ...
1
vote
1answer
101 views

How to connect mhz transmitter arduino

How am i supposed to connect a transmitter to my raspberry pi "pins"? I have bought a transmitter online But i have to wait about 10-15 days before its delivered, so i want to make sure that thats ...
3
votes
1answer
89 views

Connecting Raspberry Pis With I2C

I would like to connect 6 slave RPis to 1 master RPi via I2C. Has this been done before and is it even possible. I know the I2C interface on the RPi has 1.8K pullup resistors so having all of those ...
1
vote
2answers
844 views

Can't figure how to identify WiFi adapter

I've got a Cisco Linksys wireless module AE1200 and I need to connect it to my new Raspberry Pi in order to connect wirelessly. When I type the lsusb command it appears but the flashing led is never ...
2
votes
2answers
2k views

How can I connect by raspberry using the tethering USB of my (android) phone

I have just installed archlinux on my new raspberry but the only way I have to connect it to internet is using the USB tethering of my Android phone. With my PC it works straightforwardly: I just ...
0
votes
2answers
820 views

Connected to the internet, but can't download data

I've been painfully trying to set up internet connection on my pi, but, unfortunately, without any result. The problem is that Pi (connected via cable, running raspbian) gets an ip address and is ...
1
vote
0answers
232 views

Using wireless and wired NIC on Pi simultaneously with raspbmc

I have a setup where I have my pi getting internet from my router on a wifi dongle, and then a blu ray player is connected to the pi's ethernet. The pi should be able to forward packets through from ...
1
vote
0answers
274 views

Wired connection continually dropping

I've been having issues with the wired connection on my Pi. The connection keeps dropping out and then reconnecting constantly. About half the time it'll completely drop after a few minutes of this. ...
9
votes
1answer
16k views

Setting up WiFi and Ethernet

I'm struggling with my configuration of my Raspberry Pi. I want to achieve the following: eth0: will be used with a static ip and can only connect to the local area network (this will be my NFS ...
0
votes
2answers
3k views

SSH with Putty to RPi: Network error: Connection timed out

I've had my RPi for a while now, and thought I'd try and set it up with SSH. I've followed loads of tutorials on how to set it up correctly, but when I try and open the ip address in putty, I get a ...
2
votes
3answers
4k views

How to set up a wireless AD HOC network if there are no other networks are available

I have a Wifi dongle for my Raspberry Pi and have it automatically connecting to 2 different Wifi networks via the wpa_config GUI. How can I get my raspberry pi to set up an AD HOC network if it ...
1
vote
2answers
1k views

SSH not working when connecting from local network, but working when connecting from external ip

Raspberry pi has been having some erratic ssh and vnc performance, it just closes itself and do not let me reconnect, i need to restart it in order to do so. i tried connecting from my external ip, as ...
1
vote
2answers
205 views

Is it possible to install update for raspbian onto and SD card via my Mac and install it on the rpi later

Apparently I have Model A and cannot connect to internet (at the moment, without additional part). Specifically I am trying to install the update that allows the RPI camera module to work. Is it ...
-1
votes
1answer
383 views

Connection to raspberry closed by remote host

my RPi is up from a month. Last 2-3 weeks i've only made the updates....and suddenly today i can't login via ssh. I get following: $ ssh pi@raspberry Connection to raspberry closed by remote host. ...