Error while connecting Raspberry Pi to GPIO pin 7. but don't exucte onn off?

Question

I have a problem with my Raspbeery Pi, which is connected to a relay box via GPIO pin 7. I have tested with Gpio.board and with gpio.bcm without success in this code:

> #This program connects with gpio7
> #setup pins
> #GPIO.setmode(GPIO.BOARD) GPIO.setmode(GPIO.BCM) GPIO.setup(4, GPIO.OUT)
> #GPIO.setup(7, GPIO.OUT)#mode Board while True:
>     GPIO.output(4, GPIO.HIGH)
>     #GPIO.output(7, GPIO.HIGH)#mode Board
>     time.sleep(5)
>     GPIO.output(4, GPIO.LOW)
>     #GPIO.output(7, GPIO.LOW) #mode Board
>     GPIO.cleanup()  #devuelve los pines a su estado inicial
> 
> exit()

This is the error both in one way and the other:

Traceback (most recent call last):File"/home/pi/Desktop/RelayPrograms/5_7OnSleepOff.py", line 13, in GPIO.output(4, GPIO.HIGH)RuntimeError: Please set pin numbering mode using GPIO.setmode(GPIO.BOARD) or GPIO.setmode(GPIO.BCM)

Am I missing something?

Answer 1

This is the solution to my question:

import os
import subprocess
import sys
import warnings
import time
from threading import Timer
import RPi.GPIO as GPIO

import time

GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False) ##Impido warning en ejecución

def blink4():#pin 7
        print ("Ejecucion iniciada...")
        time.sleep(5) ## Esperamos 1 segundo
        iteracion = 0
        while iteracion < 2: ## Segundos que durara la funcion
                GPIO.setup(4, GPIO.OUT) ## Enciendo
                print ("Encendido")
                time.sleep(5) ## Esperamos 1 segundo
                GPIO.cleanup(4) ## Apago 
                print ("Apagado")
                time.sleep(5) ## Esperamos 1 segundo
                iteracion = iteracion + 2 ## Sumo 2 porque he hecho dos parpade$
        print ("Ejecucion finalizada")

def blink23(): #pin 16
        print ("Ejecucion iniciada...")
        time.sleep(5) ## Esperamos 1 segundo
        iteracion = 0
        while iteracion < 2: ## Segundos que durara la funcion
                GPIO.setup(23, GPIO.OUT) ## Enciendo 
                print ("Encendido")
                time.sleep(5) ## Esperamos 1 segundo
                GPIO.cleanup(23) ## Apago 
                print ("Apagado")
                time.sleep(5) ## Esperamos 1 segundo
                iteracion = iteracion + 2 ## Sumo 2 porque he hecho dos parpade$
        print ("Ejecucion finalizada")

blink4()
blink23()
GPIO.cleanup() ## Hago una limpieza de los GPIO

It works right now, thank you all.