Recently my Windows 10 Tablet stuck at booting after update, so I want to burn the WIN10.ISO to flash drive to run repair but don’t know how on Raspbian. The only PC available at hand is my Raspberry PI 3.
2 Answers
connect flash drive
unmount it
sudo dd if=/path/to/your/WIN10.ISO of=/dev/sdX bs=4M status=progress; sync
replace /dev/sdX
by the correct device letter of your flash drive (to find it out: mount the flash drive, run df -h
to see mounted devices, unmount it)
Note: use of the dd tool can overwrite any partition of your machine. If you specify the wrong device in the instructions [..], you could delete your primary Linux partition. Please be careful.
source: Raspberry Pi Documentation - Installing operating system images on Linux
You can do that with dd
dd if=ISO of=/dev/sda
Should work
NOTE dd
will OVERWRITE anything, without warning, so double check your flash drive location.
You should ensure the flash drive is NOT MOUNTED
You may need to precede dd
with sudo