Timeline for Facing issue in ethernet configuration for Raspbian
Current License: CC BY-SA 4.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 25, 2019 at 21:12 | comment | added | Ingo | @SharvinShah No idea ... I mean it's not worth the effort. Look what system can do it the best and use only that. | |
| Jul 25, 2019 at 11:40 | comment | added | Sharvin26 | How can I configure the above steps with respect to connman? Any idea? | |
| Jul 24, 2019 at 13:46 | comment | added | Ingo | @SharvinShah systemd-networkd is a complete network environment and connman is also and network-manager is another and old style debian ifupdown and Raspbian dhcpcd. They all do things with the network on its own way and they are not compatible to each other. If you do a thing with one you have to disable that on the other (e.g. dhcpcd together ifupdown). I don't believe that you can mix up them as you like. Just decide what to use and then use only that one. | |
| Jul 24, 2019 at 12:31 | comment | added | Sharvin26 |
For configuring connman apart from the above I have done only this one step apt-get install connman. After that, I was not able to see the AP I checked the hostapd.service status using systemctl status hostapd.service. I found this process was exited after installing connman so I enabled it using systemctl enable hostapd.service and systemctl start hostapd.service. After that, I checked the interface using ifconfig I found that AP is available. Now I tried connecting the raspberry pi to other networks but the connmanctl couldn't connect the other networks.
|
|
| Jul 24, 2019 at 12:25 | comment | added | Sharvin26 | Actually, I need an ethernet interface too. This is working perfectly but now when I install Connman ( Connection Manager ) using apt-get install connman command then in that scenario the hostapd.service get's disable ( Also AP is not shown as an interface when I check the interfaces using ifconfig command ) but the wireless client ( i.e. connman ) works properly. Now when I start the hostapd.service manually using systemctl start hostapd.service then, in that case, I am able to see the AP working properly but the wireless client doesn't connect to any network nor the scan works. | |
| Jul 24, 2019 at 12:20 | vote | accept | Sharvin26 | ||
| Jul 24, 2019 at 11:28 | history | answered | Ingo | CC BY-SA 4.0 |