Skip to main content
Post Closed as "Needs details or clarity" by Impulss, lenik, syb0rg, Piotr Kula, SteveIrwin
added 103 characters in body
Source Link
harsha
  • 21
  • 1
  • 5

Let me get straight, I have Intel WiFi hotspot on my computer, I can broadcast and use the wireless internet at the same time, It works fine and I tested with my cell phone. There are few issues when i connect with RASPBERRY PI

  1. when I broadcast my wifi (without sharing my internet) then my raspberry pi gets the IP address and rest is proper-NO ISSUE, (IP-192.168.1.5 something like ..)

  2. but when I try to share my Internet (Intel wifi pro network software) and then broadcast my wifi then my raspberry pi is not getting the IP address, on my computer it shows connected and when I scan the IP its not listed. I don't know whats happening. Android phone works correctly but Raspberry PI is not requesting for IP i suppose(IP - 192.168.137.240 something like this ..)

My settings :

  1. --- $ sudo nano /etc/network/interfaces

    auto lo
    iface lo inet loopback
    iface eth0 inet dhcp
    
    allow-hotplug wlan0
    iface wlan0 inet dhcp
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
    iface default inet dhcp
    
  2. ---- $sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

     ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
     update_config=1
    
     network={
             ssid="Intel-CP-HARSHA-VAIO"
             scan_ssid=0
             psk="BONJOUR"
    
             # Protocol type can be: RSN (for WP2) and WPA (for WPA1)
             proto=WPA
    
             # Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
             key_mgmt=WPA-PSK
    
             # Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
             pairwise=TKIP
             group=TKIP
    
             #Authorization option should be OPEN for both WPA1/WPA2 (in less commonly         used are SHARED and LEAP)
             auth_alg=OPEN
     }
    
     network={
             ssid="Wifi-OTHER"
             key_mgmt=NONE
             auth_alg=OPEN
     }
    

and second, how do i make this wifi in continuous scan mode, mean every time of I restart my wifi hotspot the raspberry pi should automatically connect, I did all this before I re installed the OS and now its all screwed up ... I dont remember how I did, And i am certainly sure there was no background task and all I guess.

Let me get straight, I have Intel WiFi hotspot on my computer, I can broadcast and use the wireless internet at the same time, It works fine and I tested with my cell phone. There are few issues when i connect with RASPBERRY PI

  1. when I broadcast my wifi (without sharing my internet) then my raspberry pi gets the IP address and rest is proper-NO ISSUE, (IP-192.168.1.5 something like ..)

  2. but when I try to share my Internet (Intel wifi pro network software) and then broadcast my wifi then my raspberry pi is not getting the IP address, on my computer it shows connected and when I scan the IP its not listed. I don't know whats happening. Android phone works correctly but Raspberry PI is not requesting for IP i suppose(IP - 192.168.137.240 something like this ..)

My settings :

  1. --- $ sudo nano /etc/network/interfaces

    auto lo
    iface lo inet loopback
    iface eth0 inet dhcp
    
    allow-hotplug wlan0
    iface wlan0 inet dhcp
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
    iface default inet dhcp
    
  2. ---- $sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

     ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
     update_config=1
    
     network={
             ssid="Intel-CP-HARSHA-VAIO"
             scan_ssid=0
             psk="BONJOUR"
    
             # Protocol type can be: RSN (for WP2) and WPA (for WPA1)
             proto=WPA
    
             # Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
             key_mgmt=WPA-PSK
    
             # Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
             pairwise=TKIP
             group=TKIP
    
             #Authorization option should be OPEN for both WPA1/WPA2 (in less commonly         used are SHARED and LEAP)
             auth_alg=OPEN
     }
    
     network={
             ssid="Wifi-OTHER"
             key_mgmt=NONE
             auth_alg=OPEN
     }
    

and second, how do i make this wifi in continuous scan mode, mean every time of I restart my wifi hotspot the raspberry pi should automatically connect, I did all this before I re installed the OS and now its all screwed up

Let me get straight, I have Intel WiFi hotspot on my computer, I can broadcast and use the wireless internet at the same time, It works fine and I tested with my cell phone. There are few issues when i connect with RASPBERRY PI

  1. when I broadcast my wifi (without sharing my internet) then my raspberry pi gets the IP address and rest is proper-NO ISSUE, (IP-192.168.1.5 something like ..)

  2. but when I try to share my Internet (Intel wifi pro network software) and then broadcast my wifi then my raspberry pi is not getting the IP address, on my computer it shows connected and when I scan the IP its not listed. I don't know whats happening. Android phone works correctly but Raspberry PI is not requesting for IP i suppose(IP - 192.168.137.240 something like this ..)

My settings :

  1. --- $ sudo nano /etc/network/interfaces

    auto lo
    iface lo inet loopback
    iface eth0 inet dhcp
    
    allow-hotplug wlan0
    iface wlan0 inet dhcp
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
    iface default inet dhcp
    
  2. ---- $sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

     ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
     update_config=1
    
     network={
             ssid="Intel-CP-HARSHA-VAIO"
             scan_ssid=0
             psk="BONJOUR"
    
             # Protocol type can be: RSN (for WP2) and WPA (for WPA1)
             proto=WPA
    
             # Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
             key_mgmt=WPA-PSK
    
             # Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
             pairwise=TKIP
             group=TKIP
    
             #Authorization option should be OPEN for both WPA1/WPA2 (in less commonly         used are SHARED and LEAP)
             auth_alg=OPEN
     }
    
     network={
             ssid="Wifi-OTHER"
             key_mgmt=NONE
             auth_alg=OPEN
     }
    

and second, how do i make this wifi in continuous scan mode, mean every time of I restart my wifi hotspot the raspberry pi should automatically connect, I did all this before I re installed the OS and now its all screwed up ... I dont remember how I did, And i am certainly sure there was no background task and all I guess.

added 1009 characters in body
Source Link
harsha
  • 21
  • 1
  • 5

Let me get straight, I have InterIntel WiFi hotspot on my computer, I can broadcast and use the wireless internet at the same time, It works fine and I tested with my cell phone,. There are few issues when i connect with RASPBERRY PI

  1. --- $ sudo nano /etc/network/interfaces

    --- $ sudo nano /etc/network/interfaces

    auto lo
    iface lo inet loopback
    iface eth0 inet dhcp
    
    allow-hotplug wlan0
    iface wlan0 inet dhcp
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
    iface default inet dhcp
    
  2. ---- $sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

     ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
     update_config=1
    
     network={
             ssid="Intel-CP-HARSHA-VAIO"
             scan_ssid=0
             psk="BONJOUR"
    
             # Protocol type can be: RSN (for WP2) and WPA (for WPA1)
             proto=WPA
    
             # Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
             key_mgmt=WPA-PSK
    
             # Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
             pairwise=TKIP
             group=TKIP
    
             #Authorization option should be OPEN for both WPA1/WPA2 (in less commonly         used are SHARED and LEAP)
             auth_alg=OPEN
     }
    
     network={
             ssid="Wifi-OTHER"
             key_mgmt=NONE
             auth_alg=OPEN
     }
    

auto lo iface lo inet loopback iface eth0 inet dhcp

allow-hotplug wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp

  1. ---- $sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1

network={ ssid="Intel-CP-HARSHA-VAIO" scan_ssid=0 psk="8023722501"

    # Protocol type can be: RSN (for WP2) and WPA (for WPA1)
    proto=WPA

    # Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
    key_mgmt=WPA-PSK

    # Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
    pairwise=TKIP
    group=TKIP

    #Authorization option should be OPEN for both WPA1/WPA2 (in less commonly used are SHARED and LEAP)
    auth_alg=OPEN

}

network={ ssid="Wifi-ECN" key_mgmt=NONE auth_alg=OPEN }and second, how do i make this wifi in continuous scan mode, mean every time of I restart my wifi hotspot the raspberry pi should automatically connect, I did all this before I re installed the OS and now its all screwed up

Let me get straight, I have Inter WiFi hotspot on my computer, I can broadcast and use the wireless internet at the same time, It works fine and I tested with my cell phone,

  1. --- $ sudo nano /etc/network/interfaces

auto lo iface lo inet loopback iface eth0 inet dhcp

allow-hotplug wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp

  1. ---- $sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1

network={ ssid="Intel-CP-HARSHA-VAIO" scan_ssid=0 psk="8023722501"

    # Protocol type can be: RSN (for WP2) and WPA (for WPA1)
    proto=WPA

    # Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
    key_mgmt=WPA-PSK

    # Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
    pairwise=TKIP
    group=TKIP

    #Authorization option should be OPEN for both WPA1/WPA2 (in less commonly used are SHARED and LEAP)
    auth_alg=OPEN

}

network={ ssid="Wifi-ECN" key_mgmt=NONE auth_alg=OPEN }

Let me get straight, I have Intel WiFi hotspot on my computer, I can broadcast and use the wireless internet at the same time, It works fine and I tested with my cell phone. There are few issues when i connect with RASPBERRY PI

  1. --- $ sudo nano /etc/network/interfaces

    auto lo
    iface lo inet loopback
    iface eth0 inet dhcp
    
    allow-hotplug wlan0
    iface wlan0 inet dhcp
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
    iface default inet dhcp
    
  2. ---- $sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

     ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
     update_config=1
    
     network={
             ssid="Intel-CP-HARSHA-VAIO"
             scan_ssid=0
             psk="BONJOUR"
    
             # Protocol type can be: RSN (for WP2) and WPA (for WPA1)
             proto=WPA
    
             # Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
             key_mgmt=WPA-PSK
    
             # Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
             pairwise=TKIP
             group=TKIP
    
             #Authorization option should be OPEN for both WPA1/WPA2 (in less commonly         used are SHARED and LEAP)
             auth_alg=OPEN
     }
    
     network={
             ssid="Wifi-OTHER"
             key_mgmt=NONE
             auth_alg=OPEN
     }
    

and second, how do i make this wifi in continuous scan mode, mean every time of I restart my wifi hotspot the raspberry pi should automatically connect, I did all this before I re installed the OS and now its all screwed up

added 1009 characters in body
Source Link
harsha
  • 21
  • 1
  • 5

Let me get straight, I have Inter WiFi hotspot on my computer, I can broadcast and use the wireless internet at the same time, It works fine and I tested with my cell phone,

  1. when I broadcast my wifi (without sharing my internet) then my raspberry pi gets the IP address and rest is proper-NO ISSUE, (IP-192.168.1.5 something like ..)

  2. but when I try to share my Internet (Intel wifi pro network software) and then broadcast my wifi then my raspberry pi is not getting the IP address, on my computer it shows connected and when I scan the IP its not listed. I don't know whats happening. Android phone works correctly but Raspberry PI is not requesting for IP i suppose(IP - 192.168.137.240 something like this ..)

My settings :

  1. --- $ sudo nano /etc/network/interfaces

auto lo iface lo inet loopback iface eth0 inet dhcp

allow-hotplug wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp

  1. ---- $sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1

network={ ssid="Intel-CP-HARSHA-VAIO" scan_ssid=0 psk="8023722501"

    # Protocol type can be: RSN (for WP2) and WPA (for WPA1)
    proto=WPA

    # Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
    key_mgmt=WPA-PSK

    # Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
    pairwise=TKIP
    group=TKIP

    #Authorization option should be OPEN for both WPA1/WPA2 (in less commonly used are SHARED and LEAP)
    auth_alg=OPEN

}

network={ ssid="Wifi-ECN" key_mgmt=NONE auth_alg=OPEN }

Let me get straight, I have Inter WiFi hotspot on my computer, I can broadcast and use the wireless internet at the same time, It works fine and I tested with my cell phone,

  1. when I broadcast my wifi (without sharing my internet) then my raspberry pi gets the IP address and rest is proper-NO ISSUE, (IP-192.168.1.5 something like ..)

  2. but when I try to share my Internet (Intel wifi pro network software) and then broadcast my wifi then my raspberry pi is not getting the IP address, on my computer it shows connected and when I scan the IP its not listed. I don't know whats happening. Android phone works correctly but Raspberry PI is not requesting for IP i suppose(IP - 192.168.137.240 something like this ..)

Let me get straight, I have Inter WiFi hotspot on my computer, I can broadcast and use the wireless internet at the same time, It works fine and I tested with my cell phone,

  1. when I broadcast my wifi (without sharing my internet) then my raspberry pi gets the IP address and rest is proper-NO ISSUE, (IP-192.168.1.5 something like ..)

  2. but when I try to share my Internet (Intel wifi pro network software) and then broadcast my wifi then my raspberry pi is not getting the IP address, on my computer it shows connected and when I scan the IP its not listed. I don't know whats happening. Android phone works correctly but Raspberry PI is not requesting for IP i suppose(IP - 192.168.137.240 something like this ..)

My settings :

  1. --- $ sudo nano /etc/network/interfaces

auto lo iface lo inet loopback iface eth0 inet dhcp

allow-hotplug wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp

  1. ---- $sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1

network={ ssid="Intel-CP-HARSHA-VAIO" scan_ssid=0 psk="8023722501"

    # Protocol type can be: RSN (for WP2) and WPA (for WPA1)
    proto=WPA

    # Key management type can be: WPA-PSK or WPA-EAP (Pre-Shared or Enterprise)
    key_mgmt=WPA-PSK

    # Pairwise can be CCMP or TKIP (for WPA2 or WPA1)
    pairwise=TKIP
    group=TKIP

    #Authorization option should be OPEN for both WPA1/WPA2 (in less commonly used are SHARED and LEAP)
    auth_alg=OPEN

}

network={ ssid="Wifi-ECN" key_mgmt=NONE auth_alg=OPEN }

Source Link
harsha
  • 21
  • 1
  • 5
Loading