Timeline for touch 7" rpi display does not wake up when in console after rpi display goes blank
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 22, 2021 at 17:11 | comment | added | KipiK | Pi and Display are working fine for days, and display is properly working when using Desktop Pi. my only question is to have the touch part waking up a blank rpi when only using console. If i configure rpi display to goes blank after 300 seconds, it works, but only a keyboard stroke will wake it up, not a touch on the display, that's my question. | |
| Mar 21, 2021 at 16:53 | comment | added | Dougie | The RPi display is NOT plug'n'play. Whenever you want to change its configuration or anything to do with the RPi display you must shutdown, pull power and re-connect power to your Raspberry to get the firmware to recognise the touch screen and enable the device. | |
| Mar 20, 2021 at 19:05 | review | First posts | |||
| Mar 21, 2021 at 16:53 | |||||
| Mar 20, 2021 at 18:56 | history | asked | KipiK | CC BY-SA 4.0 |