-I just want a recommendation for an analog air pressure transducer with a range from 0-10 bar (to be used in an electro-pneumatic system) to be connected easily with RPI4 (compatible with RPI4) and not expensive (10-15$)!? Thanks

-I also found that in other APPs like the one in the second photo that they use a level shifter between RPI&ADC, so do you think that I have to add it to the schematic here or the ADC can be connected directly to RPI!?

• I want to do a project like this one so that I can read the analog value of the pressure through RPI. I suppose also to use codesys SW to program RPI using ladder language (not to use python), I am not sure until now if that is possible or not.

• here is the link of the YouTube video explaining the project in the photo below "https://www.youtube.com/watch?v=wJgyszOSoQU"

I just want a recommendation for an analog air pressure transducer with a range from 0-10 bar (to be used in an electro-pneumatic system) to be connected easily with RPi 4 (compatible with RPi 4) and not expensive ($10-15)!?

I also found that in other APPs like the one in the second photo that they use a level shifter between RPi & ADC, so do you think that I have to add it to the schematic here or the ADC can be connected directly to RPi!?

I want to do a project like this one so that I can read the analog value of the pressure through RPi. I suppose also to use Codesys to program RPi using ladder language (not to use Python), I am not sure until now if that is possible or not.

Here is the link of the YouTube video explaining the project in the photo below Raspberry Pi Analog Water Sensors ADC Tutorial.

-I just want a recommendation for an analog air pressure transducer with a range from 0-10 bar (to be used in an electro-pneumatic system) to be connected easily with RPI4 (compatible with RPI4) and not expensive (10-15$)!? Thanks

-I also found that in other APPs like the one in the second photo that they use a level shifter between RPI&ADC, so do you think that I have to add it to the schematic here or the ADC can be connected directly to RPI!?

• I want to do a project like this one so that I can read the analog value of the pressure through RPI. I suppose also to use codesys SW to program RPI using ladder language (not to use python)

-I just want a recommendation for an analog air pressure transducer with a range from 0-10 bar (to be used in an electro-pneumatic system) to be connected easily with RPI4 (compatible with RPI4) and not expensive (10-15$)!? Thanks

-I also found that in other APPs like the one in the second photo that they use a level shifter between RPI&ADC, so do you think that I have to add it to the schematic here or the ADC can be connected directly to RPI!?

• I want to do a project like this one so that I can read the analog value of the pressure through RPI. I suppose also to use codesys SW to program RPI using ladder language (not to use python), I am not sure until now if that is possible or not.

• here is the link of the YouTube video explaining the project in the photo below "https://www.youtube.com/watch?v=wJgyszOSoQU"

I just want a recommendation for an analog air pressure transducer with a range from 0-10 bar (to be used in an electro-pneumatic system) to be connected easily with RPI4 (compatible with RPI4) and not expensive (10-15$)!? Thanks  

• I want to do a project like this one so that I can read the analog value of the pressure through RPI. I suppose also to use codesys SW to program RPI using ladder language (not to use python)

-I just want a recommendation for an analog air pressure transducer with a range from 0-10 bar (to be used in an electro-pneumatic system) to be connected easily with RPI4 (compatible with RPI4) and not expensive (10-15$)!? Thanks

-I also found that in other APPs like the one in the second photo that they use a level shifter between RPI&ADC, so do you think that I have to add it to the schematic here or the ADC can be connected directly to RPI!?

• I want to do a project like this one so that I can read the analog value of the pressure through RPI. I suppose also to use codesys SW to program RPI using ladder language (not to use python)