Return to Answer

Included comments

Source Link

edited Dec 18, 2014 at 16:32

UseI suppose you have an WLAN adapter attached to your PI so you are able to connect to your WLAN. I suggest to connect your Pi to your labtop via cable, ssh into the box, update /etc/network/interfaces to use the WLAN adapter, unplug the cable and use the following command to find the IP address of your Pi (adapt the network definition to your local environment)

sudo nmap -sP 192.168.0.0/24 | awk '/^Nmap/{ip=$NF}/B8:27:EB/{print ip}'

and then connect with ssh.

Another way suggested by elParaguayo is to mount the SD card on the machine that you used to flash the card in the first place and edit the interfaces file that way.

Use the following command to find the IP address of your Pi (adapt the network definition to your local environment)

sudo nmap -sP 192.168.0.0/24 | awk '/^Nmap/{ip=$NF}/B8:27:EB/{print ip}'

and then connect with ssh.

I suppose you have an WLAN adapter attached to your PI so you are able to connect to your WLAN. I suggest to connect your Pi to your labtop via cable, ssh into the box, update /etc/network/interfaces to use the WLAN adapter, unplug the cable and use the following command to find the IP address of your Pi (adapt the network definition to your local environment)

sudo nmap -sP 192.168.0.0/24 | awk '/^Nmap/{ip=$NF}/B8:27:EB/{print ip}'

and then connect with ssh.

Another way suggested by elParaguayo is to mount the SD card on the machine that you used to flash the card in the first place and edit the interfaces file that way.

Source Link

created Dec 18, 2014 at 9:01

framp

Use the following command to find the IP address of your Pi (adapt the network definition to your local environment)

sudo nmap -sP 192.168.0.0/24 | awk '/^Nmap/{ip=$NF}/B8:27:EB/{print ip}'

and then connect with ssh.