Skip to main content
Raspberry Pi

Return to Answer

added 83 characters in body; added 21 characters in body
Source Link
Garnett Haines
Garnett Haines
  • 315
  • 1
  • 2
  • 4

In your script you are using BMC and setting 24 high. Since you are using BMC you will not be switching pin 24. BMC 24 is actually pin 18. To connect your LED put a resistor (330 ohms should do) in series with it then connect between pin 18 and ground. Follow this link to see BMC and actual pin layout

In your script you are using BMC and setting 24 high. Since you are using BMC you will not be switching pin 24. BMC 24 is actually pin 18. To connect your LED put a resistor in series with it then connect between pin 18 and ground.

In your script you are using BMC and setting 24 high. Since you are using BMC you will not be switching pin 24. BMC 24 is actually pin 18. To connect your LED put a resistor (330 ohms should do) in series with it then connect between pin 18 and ground. Follow this link to see BMC and actual pin layout

Source Link
Garnett Haines
Garnett Haines
  • 315
  • 1
  • 2
  • 4

In your script you are using BMC and setting 24 high. Since you are using BMC you will not be switching pin 24. BMC 24 is actually pin 18. To connect your LED put a resistor in series with it then connect between pin 18 and ground.