Revisions to Installing rethinkdb/ any diff. equivalent db

replaced http://stackoverflow.com/ with https://stackoverflow.com/

Source Link

edited May 23, 2017 at 12:37

1

EDIT: You have to remove temporarily, the exit 0 in the comments of /etc/rc.local otherwise sed -i '/exit 0/i\/etc\/S99rc.installer' /etc/rc.local will be inserted after each exit 0. Or change the script accordingly: http://stackoverflow.com/questions/29256795/how-to-insert-a-line-before-the-first-and-last-matching-pattern-using-sed https://stackoverflow.com/questions/29256795/how-to-insert-a-line-before-the-first-and-last-matching-pattern-using-sed

EDIT: You have to remove temporarily, the exit 0 in the comments of /etc/rc.local otherwise sed -i '/exit 0/i\/etc\/S99rc.installer' /etc/rc.local will be inserted after each exit 0. Or change the script accordingly: http://stackoverflow.com/questions/29256795/how-to-insert-a-line-before-the-first-and-last-matching-pattern-using-sed

EDIT: You have to remove temporarily, the exit 0 in the comments of /etc/rc.local otherwise sed -i '/exit 0/i\/etc\/S99rc.installer' /etc/rc.local will be inserted after each exit 0. Or change the script accordingly: https://stackoverflow.com/questions/29256795/how-to-insert-a-line-before-the-first-and-last-matching-pattern-using-sed

added 341 characters in body

Source Link

edited Apr 12, 2016 at 13:03

Andi Giga

543
1
7
17

#RASPI INSTALLATION SCRIPT
set -eu #exit on any error & show bugs

Failure () {
  sudo -u pi echo rm /home/pi/installscript.status
  exit 1
  echo "FAILURE PLEASE CHECK INSTALLSCRIPT"
}

echo "PLEASE DO RASPI-CONFIG BEFORE: set boot to logged in and non desktop mode"
counter=0

while [ -f /home/pi/installscript.status ]; do
  counter=$((counter+1))

  if [ "$counter" -gt "100" ]
  then
    Failure
  fi

  status=$(< /home/pi/installscript.status)
  sudo -u pi echo "Current install step: $status"

#=================================== WIFI SETUP  && SYSTEM UPGRADE ==========================================
  if [ "$status" == "start" ] #wifi setup
  then
    chmod 755 /etc/S99rc.installer
    sed -i '/exit 0/i\/etc\/S99rc.installer' /etc/rc.local
    echo "setup autostart installer"
    printf 'network={%s\n\tssid="YOUR_SSID"%s\n\tpsk="YOUR_PASSWORD"%s\n}' >> /etc/wpa_supplicant/wpa_supplicant.conf
    echo "setup wifi"
    apt-get update
    apt-get upgrade
    'swap' > /home/pi/installscript.status
    echo "upgraded system"

#=================================== INCREASE SWAP ==========================================
  elif [ "$status" == "swap" ] #increase swap space
  then
    sed -i.bak 's/^\(CONF_SWAPFILE=\).*/\11000/' /etc/dphys-swapfile
    /etc/init.d/dphys-swapfile start
    sleep 5
    free -m
    sudo -u pi echo 'database' > /home/pi/installscript.status
    echo "increased swap"

#=================================== RETHINKDB ==========================================
  elif [ "$status" == "database" ]
  then
    apt-get install g++ protobuf-compiler libprotobuf-dev libboost-dev curl m4 wget
    cd /home/pi/Downloads
    wget https://download.rethinkdb.com/dist/rethinkdb-2.3.0.tgz
    tar vxf rethinkdb-2.3.0.tgz
    cd rethinkdb-2.3.0
    ./configure --with-system-malloc --allow-fetch
    make ALLOW_WARNINGS=1
    make install ALLOW_WARNINGS=1
    sudo -u pi echo 'swap2' > /home/pi/installscript.status
    echo "installed rethinkdb 2.3.0"

#=================================== DECREASE SWAP ==========================================
  elif [ "$status" == "swap2" ] #decrease swap space
  then
    sed -i.bak 's/^\(CONF_SWAPFILE=\).*/\1100/' /etc/dphys-swapfile
    /etc/init.d/dphys-swapfile start
    sleep 10
    free -m
    sudo -u pi echo 'autostart' > /home/pi/installscript.status
    echo "decreased swap"

#=================================== APPLY AUTOSTARTS ==========================================

  elif [ "$status" == "autostart" ]
  then
    #database
    sed -i '/exit 0/irethinkdb --http-port port 8090' /etc/rc.local


    sudo -u pi echo 'delete' > /home/pi/installscript.status
    echo "added autostarts"

  elif [ "$status" == "delete" ] #clean up when the script was succesful
  then
    sudo -u pi echo rm /home/pi/installscript.status
    sed -i.bak '/bash \/etc\/S99rc.installer/d' /etc/rc.local
    echo "installations finished"
    exit 0
    reboot
  else
    Failure
  fi
done
ls -l /home/pi/installscript.status
echo "nothing to do"
exit 0

EDIT: You have to remove temporarily, the exit 0 in the comments of /etc/rc.local otherwise sed -i '/exit 0/i\/etc\/S99rc.installer' /etc/rc.local will be inserted after each exit 0. Or change the script accordingly: http://stackoverflow.com/questions/29256795/how-to-insert-a-line-before-the-first-and-last-matching-pattern-using-sed

#RASPI INSTALLATION SCRIPT
set -eu #exit on any error & show bugs

Failure () {
  sudo -u pi echo rm /home/pi/installscript.status
  exit 1
  echo "FAILURE PLEASE CHECK INSTALLSCRIPT"
}

echo "PLEASE DO RASPI-CONFIG BEFORE: set boot to logged in and non desktop mode"
counter=0

while [ -f /home/pi/installscript.status ]; do
  counter=$((counter+1))

  if [ "$counter" -gt "100" ]
  then
    Failure
  fi

  status=$(< /home/pi/installscript.status)
  sudo -u pi echo "Current install step: $status"

#=================================== WIFI SETUP  && SYSTEM UPGRADE ==========================================
  if [ "$status" == "start" ] #wifi setup
  then
    chmod 755 /etc/S99rc.installer
    sed -i '/exit 0/i\/etc\/S99rc.installer' /etc/rc.local
    echo "setup autostart installer"
    printf 'network={%s\n\tssid="YOUR_SSID"%s\n\tpsk="YOUR_PASSWORD"%s\n}' >> /etc/wpa_supplicant/wpa_supplicant.conf
    echo "setup wifi"
    apt-get update
    apt-get upgrade
    'swap' > /home/pi/installscript.status
    echo "upgraded system"

#=================================== INCREASE SWAP ==========================================
  elif [ "$status" == "swap" ] #increase swap space
  then
    sed -i.bak 's/^\(CONF_SWAPFILE=\).*/\11000/' /etc/dphys-swapfile
    /etc/init.d/dphys-swapfile start
    sleep 5
    free -m
    sudo -u pi echo 'database' > /home/pi/installscript.status
    echo "increased swap"

#=================================== RETHINKDB ==========================================
  elif [ "$status" == "database" ]
  then
    apt-get install g++ protobuf-compiler libprotobuf-dev libboost-dev curl m4 wget
    cd /home/pi/Downloads
    wget https://download.rethinkdb.com/dist/rethinkdb-2.3.0.tgz
    tar vxf rethinkdb-2.3.0.tgz
    cd rethinkdb-2.3.0
    ./configure --with-system-malloc --allow-fetch
    make ALLOW_WARNINGS=1
    make install ALLOW_WARNINGS=1
    sudo -u pi echo 'swap2' > /home/pi/installscript.status
    echo "installed rethinkdb 2.3.0"

#=================================== DECREASE SWAP ==========================================
  elif [ "$status" == "swap2" ] #decrease swap space
  then
    sed -i.bak 's/^\(CONF_SWAPFILE=\).*/\1100/' /etc/dphys-swapfile
    /etc/init.d/dphys-swapfile start
    sleep 10
    free -m
    sudo -u pi echo 'autostart' > /home/pi/installscript.status
    echo "decreased swap"

#=================================== APPLY AUTOSTARTS ==========================================

  elif [ "$status" == "autostart" ]
  then
    #database
    sed -i '/exit 0/irethinkdb --http-port port 8090' /etc/rc.local


    sudo -u pi echo 'delete' > /home/pi/installscript.status
    echo "added autostarts"

  elif [ "$status" == "delete" ] #clean up when the script was succesful
  then
    sudo -u pi echo rm /home/pi/installscript.status
    sed -i.bak '/bash \/etc\/S99rc.installer/d' /etc/rc.local
    echo "installations finished"
    exit 0
    reboot
  else
    Failure
  fi
done
ls -l /home/pi/installscript.status
echo "nothing to do"
exit 0

#RASPI INSTALLATION SCRIPT
set -eu #exit on any error & show bugs

Failure () {
  sudo -u pi echo rm /home/pi/installscript.status
  exit 1
  echo "FAILURE PLEASE CHECK INSTALLSCRIPT"
}

echo "PLEASE DO RASPI-CONFIG BEFORE: set boot to logged in and non desktop mode"
counter=0

while [ -f /home/pi/installscript.status ]; do
  counter=$((counter+1))

  if [ "$counter" -gt "100" ]
  then
    Failure
  fi

  status=$(< /home/pi/installscript.status)
  sudo -u pi echo "Current install step: $status"

#=================================== WIFI SETUP  && SYSTEM UPGRADE ==========================================
  if [ "$status" == "start" ] #wifi setup
  then
    chmod 755 /etc/S99rc.installer
    sed -i '/exit 0/i\/etc\/S99rc.installer' /etc/rc.local
    echo "setup autostart installer"
    printf 'network={%s\n\tssid="YOUR_SSID"%s\n\tpsk="YOUR_PASSWORD"%s\n}' >> /etc/wpa_supplicant/wpa_supplicant.conf
    echo "setup wifi"
    apt-get update
    apt-get upgrade
    'swap' > /home/pi/installscript.status
    echo "upgraded system"

#=================================== INCREASE SWAP ==========================================
  elif [ "$status" == "swap" ] #increase swap space
  then
    sed -i.bak 's/^\(CONF_SWAPFILE=\).*/\11000/' /etc/dphys-swapfile
    /etc/init.d/dphys-swapfile start
    sleep 5
    free -m
    sudo -u pi echo 'database' > /home/pi/installscript.status
    echo "increased swap"

#=================================== RETHINKDB ==========================================
  elif [ "$status" == "database" ]
  then
    apt-get install g++ protobuf-compiler libprotobuf-dev libboost-dev curl m4 wget
    cd /home/pi/Downloads
    wget https://download.rethinkdb.com/dist/rethinkdb-2.3.0.tgz
    tar vxf rethinkdb-2.3.0.tgz
    cd rethinkdb-2.3.0
    ./configure --with-system-malloc --allow-fetch
    make ALLOW_WARNINGS=1
    make install ALLOW_WARNINGS=1
    sudo -u pi echo 'swap2' > /home/pi/installscript.status
    echo "installed rethinkdb 2.3.0"

#=================================== DECREASE SWAP ==========================================
  elif [ "$status" == "swap2" ] #decrease swap space
  then
    sed -i.bak 's/^\(CONF_SWAPFILE=\).*/\1100/' /etc/dphys-swapfile
    /etc/init.d/dphys-swapfile start
    sleep 10
    free -m
    sudo -u pi echo 'autostart' > /home/pi/installscript.status
    echo "decreased swap"

#=================================== APPLY AUTOSTARTS ==========================================

  elif [ "$status" == "autostart" ]
  then
    #database
    sed -i '/exit 0/irethinkdb --http-port 8090' /etc/rc.local


    sudo -u pi echo 'delete' > /home/pi/installscript.status
    echo "added autostarts"

  elif [ "$status" == "delete" ] #clean up when the script was succesful
  then
    sudo -u pi echo rm /home/pi/installscript.status
    sed -i.bak '/bash \/etc\/S99rc.installer/d' /etc/rc.local
    echo "installations finished"
    exit 0
    reboot
  else
    Failure
  fi
done
ls -l /home/pi/installscript.status
echo "nothing to do"
exit 0

EDIT: You have to remove temporarily, the exit 0 in the comments of /etc/rc.local otherwise sed -i '/exit 0/i\/etc\/S99rc.installer' /etc/rc.local will be inserted after each exit 0. Or change the script accordingly: http://stackoverflow.com/questions/29256795/how-to-insert-a-line-before-the-first-and-last-matching-pattern-using-sed

Source Link

created Apr 12, 2016 at 12:03

Andi Giga

543
1
7
17

From my experience. Swap space on a SD Card is considered as not trustworthy and it also slows down the installation process.

disable any boot to desktop in raspi-config, this saves valuable memory.
disable unnecessary autostart executions
do the most critical installation (for me rethinkdb) first
write an installation script, this makes it easier to start from a bare img if you have to start again. Also it allows you easily to change the order and retry the installation.
save your SD after each crucial step to an img/after the installation

I copy my installation script in here, maybe you can use it, if not the important steps can be extracted from the script. Please let me know if you need some explanation to one of the steps.

You have to set YOUR_SSID and YOUR_PASSWORD to include your Wifi. Copy this script in a new file: nano /etc/S99rc.installer and add a file with echo "start">/home/pi/installscript.status.

I started in the middle with applying this script, so no warranty that this works, maybe some adaption is necessary.

#RASPI INSTALLATION SCRIPT
set -eu #exit on any error & show bugs

Failure () {
  sudo -u pi echo rm /home/pi/installscript.status
  exit 1
  echo "FAILURE PLEASE CHECK INSTALLSCRIPT"
}

echo "PLEASE DO RASPI-CONFIG BEFORE: set boot to logged in and non desktop mode"
counter=0

while [ -f /home/pi/installscript.status ]; do
  counter=$((counter+1))

  if [ "$counter" -gt "100" ]
  then
    Failure
  fi

  status=$(< /home/pi/installscript.status)
  sudo -u pi echo "Current install step: $status"

#=================================== WIFI SETUP  && SYSTEM UPGRADE ==========================================
  if [ "$status" == "start" ] #wifi setup
  then
    chmod 755 /etc/S99rc.installer
    sed -i '/exit 0/i\/etc\/S99rc.installer' /etc/rc.local
    echo "setup autostart installer"
    printf 'network={%s\n\tssid="YOUR_SSID"%s\n\tpsk="YOUR_PASSWORD"%s\n}' >> /etc/wpa_supplicant/wpa_supplicant.conf
    echo "setup wifi"
    apt-get update
    apt-get upgrade
    'swap' > /home/pi/installscript.status
    echo "upgraded system"

#=================================== INCREASE SWAP ==========================================
  elif [ "$status" == "swap" ] #increase swap space
  then
    sed -i.bak 's/^\(CONF_SWAPFILE=\).*/\11000/' /etc/dphys-swapfile
    /etc/init.d/dphys-swapfile start
    sleep 5
    free -m
    sudo -u pi echo 'database' > /home/pi/installscript.status
    echo "increased swap"

#=================================== RETHINKDB ==========================================
  elif [ "$status" == "database" ]
  then
    apt-get install g++ protobuf-compiler libprotobuf-dev libboost-dev curl m4 wget
    cd /home/pi/Downloads
    wget https://download.rethinkdb.com/dist/rethinkdb-2.3.0.tgz
    tar vxf rethinkdb-2.3.0.tgz
    cd rethinkdb-2.3.0
    ./configure --with-system-malloc --allow-fetch
    make ALLOW_WARNINGS=1
    make install ALLOW_WARNINGS=1
    sudo -u pi echo 'swap2' > /home/pi/installscript.status
    echo "installed rethinkdb 2.3.0"

#=================================== DECREASE SWAP ==========================================
  elif [ "$status" == "swap2" ] #decrease swap space
  then
    sed -i.bak 's/^\(CONF_SWAPFILE=\).*/\1100/' /etc/dphys-swapfile
    /etc/init.d/dphys-swapfile start
    sleep 10
    free -m
    sudo -u pi echo 'autostart' > /home/pi/installscript.status
    echo "decreased swap"

#=================================== APPLY AUTOSTARTS ==========================================

  elif [ "$status" == "autostart" ]
  then
    #database
    sed -i '/exit 0/irethinkdb --http-port port 8090' /etc/rc.local


    sudo -u pi echo 'delete' > /home/pi/installscript.status
    echo "added autostarts"

  elif [ "$status" == "delete" ] #clean up when the script was succesful
  then
    sudo -u pi echo rm /home/pi/installscript.status
    sed -i.bak '/bash \/etc\/S99rc.installer/d' /etc/rc.local
    echo "installations finished"
    exit 0
    reboot
  else
    Failure
  fi
done
ls -l /home/pi/installscript.status
echo "nothing to do"
exit 0

Stack Exchange Network

Return to Answer