I have a Problem using wiringPi with crosstool-ng. First I got the Error:

libwiringPi.so: file not recognized: File format not recognized

I think the problem might be that ./build will not use crosstool-ng to build wiringPi? I also tried to change the makefile:

CC = arm-unknown-linux-gnueabi-gcc
#CC =gcc

Then, while building wiringPi I get the error:

make: arm-unknown-linux-gnueabi-gcc: Command not found

If I type the command right into the terminal, the command works. Any other suggestions how to make wiringPi work with crosstool-ng? I am using Ubuntu 14.04 on my Notebook and Raspbian.

For installing I followed these tutorials:

Crosstool-NG

WiringPi

I have a Problem using wiringPi with crosstool-ng. First I got this Error:

libwiringPi.so: file not recognized: File format not recognized

I think the problem might be that ./build will not use crosstool-ng to build wiringPi? I also tried to change the makefile:

CC = arm-unknown-linux-gnueabi-gcc
#CC =gcc

Then, while building wiringPi I got this error:

make: arm-unknown-linux-gnueabi-gcc: Command not found

If I type the command right into the terminal, the command works. Any other suggestions how to make wiringPi work with crosstool-ng? I am using Ubuntu 14.04 on my Notebook and Raspbian on the Pi.

For installing I followed these tutorials:

Crosstool-NG

WiringPi