Skip to main content
Raspberry Pi

Return to Question

added 120 characters in body
Source Link
cr0ssb0w
cr0ssb0w
  • 13
  • 5

I want to make use of the clock of rpi. How can I do it? On an arduino it would have been as easy as setting up an TCCR and the respective pin would give the required clock signal. I require two clock signals for my circuit,44.1 KHz and 16 MHz. If it is at all possible, how can it be done?

ThankI know GPIO4 can be used as GPCLK0 in an alternate mode but only that about it. Any suggestion would be appreciated. Thank you.

I want to make use of the clock of rpi. How can I do it? On an arduino it would have been as easy as setting up an TCCR and the respective pin would give the required clock signal. I require two clock signals for my circuit,44.1 KHz and 16 MHz. If it is at all possible, how can it be done?

Thank you.

I want to make use of the clock of rpi. How can I do it? On an arduino it would have been as easy as setting up an TCCR and the respective pin would give the required clock signal. I require two clock signals for my circuit,44.1 KHz and 16 MHz. If it is at all possible, how can it be done?

I know GPIO4 can be used as GPCLK0 in an alternate mode but only that about it. Any suggestion would be appreciated. Thank you.

Source Link
cr0ssb0w
cr0ssb0w
  • 13
  • 5

Multiple clock outputs from Rpi

I want to make use of the clock of rpi. How can I do it? On an arduino it would have been as easy as setting up an TCCR and the respective pin would give the required clock signal. I require two clock signals for my circuit,44.1 KHz and 16 MHz. If it is at all possible, how can it be done?

Thank you.