Return to Question

###0. Basic Info Firewall/Gateway/DHCP/DNS = 10.150.15.1 wlan0 = 10.150.15.2 eth0 = 10.150.15.3

###0. Basic Info Firewall/Gateway/DHCP/DNS = 10.150.15.1 wlan0 = 10.150.25.2 eth0 = 10.150.15.3

Recently my home AP took a massive plunge when a cat knocked it over, and long story short, we just had a baby and my money is going towards what we need for the little man. At this point I decided to use a Rpi3 with Raspibian Jessie Distro. It is fully updated, expanded, timezone set and kernel updated. I have been hunting the internet and using quite a few different guides to attempt to get an Access Point setup to work.

I have been hunting the internet and using quite a few different guides to attempt to get an Access Point setup to work.

Errors?

Upon executing the following command i get some info on the initialization of the hostapd config.

CMD: sudo /usr/sbin/hostapd /etc/hostapd/hostapd.conf

Configuration file: /etc/hostapd/hostapde.conf
Failed to create interface mon.wlan0: -95 (Operation not supported)
wlan0: Could not connect to kernel driver
Using interface wlan with hwaddr >MAC ADDRESS< and ssid "name"
wlan0: interface stat UNINITIALIZED->ENABLED
wlan0: AP-ENABLED