2 fixed format in code block for the fallbacks
source | link

If you are running a recent Raspbian /etc/network/interfaces should be as below. If you have changed it to the original .

# interfaces(5) file used by ifup(8) and ifdown(8)

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

auto lo
iface lo inet loopback

iface eth0 inet manual

allow-hotplug wlan0
iface wlan0 inet manual
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

allow-hotplug wlan1
iface wlan1 inet manual
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

In /etc/wpa_supplicant/wpa_supplicant.conf find your network and add the line ( id_str="A_name_of_your_choice" ) at the bottom

network={ ssid="ESSID" psk="Your_wifi_password" id_str="A_name_of_your_choice" }

Setup a Static IP Address

Edit /etc/dhcpcd.conf as follows:-

 Here is an example which configures a static address, routes and dns.
       A_name_of_your_choice static_eth0
       static ip_address=10.1.1.12/24
       static routers=10.1.1.1
       static domain_name_servers=10.1.1.1

       A_name_of_your_choice static_wlan0
       static ip_address=192.168.0.12/24
       static routers=192.168.0.1
       static domain_name_servers=192.168.0.1

       interface wlan0
       fallback static_wlan0

       interface eth0
       fallback static_eth0

Interface wlan0 fallback static_wlan0 Interface eth0 fallback static_eth0

In this way, you can add a static IP for a specific router . I believe this is a more dynamic way to do things. Any queries you can send a direct message on facbook,instagram my id grksumanth.

If you are running a recent Raspbian /etc/network/interfaces should be as below. If you have changed it to the original .

# interfaces(5) file used by ifup(8) and ifdown(8)

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

auto lo
iface lo inet loopback

iface eth0 inet manual

allow-hotplug wlan0
iface wlan0 inet manual
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

allow-hotplug wlan1
iface wlan1 inet manual
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

In /etc/wpa_supplicant/wpa_supplicant.conf find your network and add the line ( id_str="A_name_of_your_choice" ) at the bottom

network={ ssid="ESSID" psk="Your_wifi_password" id_str="A_name_of_your_choice" }

Setup a Static IP Address

Edit /etc/dhcpcd.conf as follows:-

 Here is an example which configures a static address, routes and dns.
       A_name_of_your_choice static_eth0
       static ip_address=10.1.1.12/24
       static routers=10.1.1.1
       static domain_name_servers=10.1.1.1

      A_name_of_your_choice static_wlan0
       static ip_address=192.168.0.12/24
       static routers=192.168.0.1
       static domain_name_servers=192.168.0.1

Interface wlan0 fallback static_wlan0 Interface eth0 fallback static_eth0

In this way, you can add a static IP for a specific router . I believe this is a more dynamic way to do things. Any queries you can send a direct message on facbook,instagram my id grksumanth.

If you are running a recent Raspbian /etc/network/interfaces should be as below. If you have changed it to the original .

# interfaces(5) file used by ifup(8) and ifdown(8)

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

auto lo
iface lo inet loopback

iface eth0 inet manual

allow-hotplug wlan0
iface wlan0 inet manual
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

allow-hotplug wlan1
iface wlan1 inet manual
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

In /etc/wpa_supplicant/wpa_supplicant.conf find your network and add the line ( id_str="A_name_of_your_choice" ) at the bottom

network={ ssid="ESSID" psk="Your_wifi_password" id_str="A_name_of_your_choice" }

Setup a Static IP Address

Edit /etc/dhcpcd.conf as follows:-

 Here is an example which configures a static address, routes and dns.
       A_name_of_your_choice static_eth0
       static ip_address=10.1.1.12/24
       static routers=10.1.1.1
       static domain_name_servers=10.1.1.1

       A_name_of_your_choice static_wlan0
       static ip_address=192.168.0.12/24
       static routers=192.168.0.1
       static domain_name_servers=192.168.0.1

       interface wlan0
       fallback static_wlan0

       interface eth0
       fallback static_eth0

In this way, you can add a static IP for a specific router . I believe this is a more dynamic way to do things. Any queries you can send a direct message on facbook,instagram my id grksumanth.

1
source | link

If you are running a recent Raspbian /etc/network/interfaces should be as below. If you have changed it to the original .

# interfaces(5) file used by ifup(8) and ifdown(8)

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d

auto lo
iface lo inet loopback

iface eth0 inet manual

allow-hotplug wlan0
iface wlan0 inet manual
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

allow-hotplug wlan1
iface wlan1 inet manual
    wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

In /etc/wpa_supplicant/wpa_supplicant.conf find your network and add the line ( id_str="A_name_of_your_choice" ) at the bottom

network={ ssid="ESSID" psk="Your_wifi_password" id_str="A_name_of_your_choice" }

Setup a Static IP Address

Edit /etc/dhcpcd.conf as follows:-

 Here is an example which configures a static address, routes and dns.
       A_name_of_your_choice static_eth0
       static ip_address=10.1.1.12/24
       static routers=10.1.1.1
       static domain_name_servers=10.1.1.1

      A_name_of_your_choice static_wlan0
       static ip_address=192.168.0.12/24
       static routers=192.168.0.1
       static domain_name_servers=192.168.0.1

Interface wlan0 fallback static_wlan0 Interface eth0 fallback static_eth0

In this way, you can add a static IP for a specific router . I believe this is a more dynamic way to do things. Any queries you can send a direct message on facbook,instagram my id grksumanth.