Skip to main content
Raspberry Pi

Return to Question

Commonmark migration
Source Link
Community Bot
Community Bot
  • 1

Reading the config.txt docs, I found this:

These values are valid if hdmi_group=1 (CEA)

 

hdmi_mode=1 VGA

Does this make the output on my HDMI port be VGA? I have a cable that with a VGA and an HDMI ports, but no converter. Would I be able to use a VGA monitor with that cable and the Pi outputting VGA? Or is this something completely different?

Reading the config.txt docs, I found this:

These values are valid if hdmi_group=1 (CEA)

 

hdmi_mode=1 VGA

Does this make the output on my HDMI port be VGA? I have a cable that with a VGA and an HDMI ports, but no converter. Would I be able to use a VGA monitor with that cable and the Pi outputting VGA? Or is this something completely different?

Reading the config.txt docs, I found this:

These values are valid if hdmi_group=1 (CEA)

hdmi_mode=1 VGA

Does this make the output on my HDMI port be VGA? I have a cable that with a VGA and an HDMI ports, but no converter. Would I be able to use a VGA monitor with that cable and the Pi outputting VGA? Or is this something completely different?

Tweeted twitter.com/StackRaspi/status/924800387403665408
added 2 characters in body
Source Link
BlueMoon93
BlueMoon93
  • 139
  • 1
  • 12

Reading the config.txt docs, I found this:

These values are valid if hdmi_group=1 (CEA) hdmi_mode=1

hdmi_mode=1 VGA

Does this make the output on my HDMI port be VGA? I have a cable that with a VGA and an HDMI ports, but no converter. Would I be able to use a VGA monitor with that cable and the Pi outputting VGA? Or is this something completely different?

Reading the config.txt docs, I found this:

These values are valid if hdmi_group=1 (CEA) hdmi_mode=1 VGA

Does this make the output on my HDMI port be VGA? I have a cable that with a VGA and an HDMI ports, but no converter. Would I be able to use a VGA monitor with that cable and the Pi outputting VGA? Or is this something completely different?

Reading the config.txt docs, I found this:

These values are valid if hdmi_group=1 (CEA)

hdmi_mode=1 VGA

Does this make the output on my HDMI port be VGA? I have a cable that with a VGA and an HDMI ports, but no converter. Would I be able to use a VGA monitor with that cable and the Pi outputting VGA? Or is this something completely different?

Source Link
BlueMoon93
BlueMoon93
  • 139
  • 1
  • 12

VGA Mode on RaspPi

Reading the config.txt docs, I found this:

These values are valid if hdmi_group=1 (CEA) hdmi_mode=1 VGA

Does this make the output on my HDMI port be VGA? I have a cable that with a VGA and an HDMI ports, but no converter. Would I be able to use a VGA monitor with that cable and the Pi outputting VGA? Or is this something completely different?