3 edited title
| link

how to install Windows IOT for new RTC(Realtime clock) Module?10 IoT does not automatically use the Real Time Clock module to automatically update the system time

2 added 72 characters in body
source | link

bought a brand new Raspberry Pi 3 DS3231 RTC Module and integrated to correct gpio pins as it should be. But somehow Windows 10 IOT seems not detect this module. than attempted to follow follow instructions. but what! all instructions are for linux. and as I know there is no sudo command etc in powershell for windows 10 to make IOT to detect this module.

so

dtoverlay=i2c-rtc,ds3231
line above added into config.txt. no luck.

so how can I make Windows 10 IOT detect the rtc module ?  

instructions are here for linux.

bought a brand new Raspberry Pi 3 DS3231 RTC Module and integrated to correct gpio pins as it should be. But somehow Windows 10 IOT seems not detect this module. than attempted to follow follow instructions. but what! all instructions are for linux. and as I know there is no sudo command etc in powershell for windows 10 to make IOT to detect this module.

so how can I make Windows 10 IOT detect the rtc module ?  

instructions are here for linux.

bought a brand new Raspberry Pi 3 DS3231 RTC Module and integrated to correct gpio pins as it should be. But somehow Windows 10 IOT seems not detect this module. than attempted to follow follow instructions. but what! all instructions are for linux. and as I know there is no sudo command etc in powershell for windows 10 to make IOT to detect this module.

dtoverlay=i2c-rtc,ds3231
line above added into config.txt. no luck.

so how can I make Windows 10 IOT detect the rtc module ?

instructions are here for linux.

1
source | link

how to install Windows IOT for new RTC(Realtime clock) Module?

bought a brand new Raspberry Pi 3 DS3231 RTC Module and integrated to correct gpio pins as it should be. But somehow Windows 10 IOT seems not detect this module. than attempted to follow follow instructions. but what! all instructions are for linux. and as I know there is no sudo command etc in powershell for windows 10 to make IOT to detect this module.

so how can I make Windows 10 IOT detect the rtc module ?

instructions are here for linux.