Timeline for How to connect GSM module to Raspberry PI3 and also using Bluetooth of Raspberry PI3
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 10, 2018 at 15:51 | vote | accept | isan | ||
| Nov 10, 2018 at 15:52 | |||||
| Nov 10, 2018 at 15:47 | comment | added | isan | This was due to the power supply, if the module is fed properly, it can be connected to the Internet, it should feed 4.2 volts with 2A | |
| Nov 3, 2018 at 15:27 | comment | added | isan |
I did what you said, enable serial port and disable serial console, but after restart pi3 both of them is enable why? and I edit CUSTOM_TTY="/dev/ttyS0" to CUSTOM_TTY="/dev/serial0" in sakis3.conf. when I run sudo ./sakis3g ----interactive connect sometimes output is Modem unable to register a network. and sometimes in step connecting ,show connected fail why it not connect to network?
|
|
| Nov 2, 2018 at 23:04 | history | answered | Milliways | CC BY-SA 4.0 |