2

I setup a Pi with a car backup camera monitor and push button. It's for displaying a to-do list that I cycle through by pressing the button. I wrote it for the command-line so I don't have to use X-server to save on cpu usage. Unfortunately I can't read the text. Any suggestions on making the text big enough to read 3 feet away?

enter image description here

Python code:

# Import the required module.
import RPi.GPIO as GPIO
import os
# Set the mode of numbering the pins.
GPIO.setmode(GPIO.BOARD)
# GPIO pin 3 is the input.
GPIO.setup(3, GPIO.IN)
def clear_console():
    os.system('clear')
i = 0
to_do = ['Take out trash', 'Vacuum', 'Put papers away', 'Put books
away', 'Put electronics away', 'Put pens away']
clear_console()
print to_do[0]

last = 0
while 1:
    if not GPIO.input(3):
        if last != 0:
            clear_console()
            i += 1
            if i < len(to_do):
                print to_do[i]
            else:
                print "Congrats! You're finished."
    last = GPIO.input(3)
5

If you're using Raspbian (The default Raspberry Pi OS), then you can use this:

sudo dpkg-reconfigure console-setup

Follow the steps, select "Let the system select a suitable font" and then select the font size you want.

Once you've gone through the setup tool, run sudo reboot

Hope this works :) (I usually use Arch Linux on my Pi, so this might not be the current method...)

(More info at eLinux)

  • Those steps worked perfectly on Raspbian for an SVideo attached screen. Selected 16x32 and instant readability, no need to reboot. – rob Nov 3 '13 at 21:54
0

Have you tried cranking down the resolution or playing with overscan settings? It's not clear if this is an HDMI or a composite connection, but you can find out more about standard video modes here and custom video modes in this thread.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.