1

I've recently bought a Raspberry Pi 4 that I intend to connect to an old TV with SCART connector to do some sweet old retro gaming. For that purpose, I bought a Pi2SCART adaptator. I've followed the instructions for the installation so I added this to config.txt :

disable_audio_dither=1
dtparam=audio=on
dtoverlay=vga666
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=87
hdmi_timings=320 1 16 30 34 240 1 2 3 22 0 0 0 60 0 6400000 1 #240p

But it doesn't seem to work. Have anyone done this kind of configuration ?

Improve this question
1
  • When you added these config parameters, did you check for conflicting lines?. E.g. isn't there another line in config.txt that reads dpi_group=1?
    – Dmitry Grigoryev
    Commented Nov 5, 2019 at 13:31

1 Answer 1

Reset to default
1

It's silly but the problem was not from the software...but the hardware ! The SCART cable I had was broken.

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.