0

Trying to connect to internet through K5150 usb modem on raspbian buster(last build from raspberry, September).

On windows it is connecting when it is plugged in.

Here is trying to connect but not receiving tx and it is the stand by icon: ↑↓ one arrow blue, one arrow grey.

When tried manual:

sudo ip link set wwan0 down

and:

sudo ip link set wwan0 up
sleep 65
ifconfig wwan0
route -n

It is:

wwan0: flags=4291<UP,BROADCAST,RUNNING,NOARP,MULTICAST>
    ...
    RX packets 0  bytes 0 (0.0 B)
    RX errors 0  dropped 0  overruns 0  frame 0
    TX packets 37  bytes 7004 (6.8 KiB)
    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface

1 Answer 1

0

Using

mbim-network /dev/cdc-wdm0 start

It is connected.

...
Network started successfully
Saving state at /tmp/mbim-network-state-cdc-wdm0... (TRID: 7)
2
  • I assume this works for you. Would you please accept the answer.
    – NomadMaker
    Dec 20, 2019 at 8:28
  • It is a timer. Still have to wait. "You can accept your own answer in 9 minutes"
    – Sam
    Dec 20, 2019 at 12:08

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.