I have a rpi 4, with a relays board on top of it, and a Bitwizard DMX hat board on top of that. The Bitwzard board doesn't have a male header on the top, so I am unable to connect my sensors. It was shipped with a 2x13 stackable header, which I don't know what to do with.
The Bitwizard board is this one : https://bitwizard.nl/shop/DMX-interface-for-Raspberry-pi
The 2x13 stackable header looks like this one : https://www.robotshop.com/ca/en/2x23-pin-stackable-header.html
So the question is, how can I stack everything, so I can connect my sensor on top of the DMX board?
