I have a raspberry pi and omron sensor d6t. This sensor comes with connector in which you can connect harness cable to it. It looks like below:

enter image description here

For my development purpose I connect the wires from sensor cable to breadboard and the from breadboard I connected it to raspberry pi male pins using male to female jumper wires. Now my development work in complete and I need to present this. So I am looking for some type of connector which can be directly connected to male pings of pi. But I am unable to find this online. Initially I thought the wires from the harness cable can be connected to frc connector but I am not sure if this can work.

Can anyone please suggest some good solution for this. Please help. Thanks

  • Du-pont jumper cables are readily available on ebay and in many retailers. Whether these will attach to your device is impossible to say. You are unlikely to find any ready made connector - and you haven't specified what pins you want to use. If not you will need to cut and solder to the existing.
    – Milliways
    Jun 23, 2020 at 7:19
  • @Milliways This sensor is connected to 2,3,5,9 pins of the pi.
    – S Andrew
    Jun 23, 2020 at 7:24
  • You can use a lever connector in combination with the Du-pont jumper cables to connect 2 wires without soldering.
    – Swedgin
    Jun 23, 2020 at 8:07
  • @Swedgin Can you please share the link to image of level connector. Please thanks
    – S Andrew
    Jun 23, 2020 at 8:34
  • @SAndrew Something like this: i.ytimg.com/vi/n8gLG6c-iKc/maxresdefault.jpg . So eg. WAGO 221 connectors
    – Swedgin
    Jun 23, 2020 at 8:56

1 Answer 1


There isn't really a connector to connect those cables to the male pins on your RPi. A common solderless method is using lever connectors like the WAGO 221 series.

enter image description here

You use a female-to-male Du-pont jumper cable from the RPi to the lever connector, and connect one of the wires fo the sensor to the other hole on the lever connector.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.