0

I tried to look over the internet, youtube and on this website to fix this but no luck resolving.

I have Kali on RPI version 2020.2b which I reinstalled for 3 times now because the answers that I found ended up making things complicated.

I had success making ssh and vnc start on boot if its connected to ethernet, before I unplug the ethernet I make sure that RPI is connected to wifi, upon disconnecting ethernet after few minutes ip scanner shows that the wifi ip is no longer connected that also means that ssh and vnc wil not work because it cannot identify the RPI even if I just unplug the ethernet.

I admit that I have shallow knowledge about this but please help me

There is no wpa_supplicant.conf file upon checking it, but I am connected to the wifi right now

Here is my ifconfig

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.254.10  netmask 255.255.255.0  broadcast 192.168.254.255        inet6 fe80::dea6:32ff:fe7f:818c  prefixlen 64  scopeid 0x20<link>
        ether dc:a6:32:7f:81:8c  txqueuelen 1000  (Ethernet)
        RX packets 10867  bytes 737638 (720.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 6668  bytes 2938383 (2.8 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 8  bytes 2504 (2.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 2504 (2.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.254.8  netmask 255.255.255.0  broadcast 192.168.254.255
        inet6 fe80::8188:5662:59c9:36bc  prefixlen 64  scopeid 0x20<link>
        ether dc:a6:32:7f:81:8e  txqueuelen 1000  (Ethernet)
        RX packets 79  bytes 3594 (3.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 71  bytes 10570 (10.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0`    
    

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.