0

I have added a spi ethernet tp my pi zero

connected it and added the needed files

anyspi.dtbo , w5500.dtbo

added in config.txt

dtparam=spi=on
dtoverlay=anyspi,spi0-0,dev="w5500",speed=30000000
dtoverlay=w5500

but I can't see it in ifconfig after reboot

all the connection are correct and the device is powered on (I have 2 other pi zero with the same connection and it's working )

where can I see in the logs what is wrong?

Ehternet PINS    PI Pins
MI               21   
V                1 (3.3V)
G                6 (GND)
Int              22
CS               24
SCK              23
MO               19

everything is like it said in this guide

https://www.instructables.com/Add-a-WIZ850io-Wiznet-W5500-Network-Port-to-Your-R/

Thanks,

Improve this question
2
  • First thought is if it works on one Zero and not another then it's a cable or software issue. First thing I would try is a copy of the SD card from a working Pi - that rules out hardware if it works...
    – user115418
    Dec 30, 2020 at 14:13
  • I have try , took the SD from one an the connection is good . so it's not this
    – Afik_Android
    Dec 30, 2020 at 15:04

0

Reset to default

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Browse other questions tagged or ask your own question.