I have a raspberry pi 2B and I wanted to install alpine linux in sys mode. I use a 64gb microsd samsung evo plus. I followed the wiki of alpine here formatting like in troubleshot the boot partition in fat32. However that doesn't seem to work. Something happened to be different in the responses to the commands, ln -s media/mmcblk0p1/boot boot is expected to give an error but it didn't gave one and the reboot doesn't takes minutes like it is written in the wiki.
When at the end I reboot there are some errors at boot:
- first the clock
Clock skew detected with '(null)' Mounting modloop->ERROR: modloop failed to start- then I have several
modprobe: can't change directory to '/lib/modules': no such file or directoryon- starting busybox mdev
- loading hardware drivers
- loading modules
You have a photo below, I don't know where to find these logs to copy them as text
Then, this is the dmesg log:
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 5.4.84-0-rpi2 (buildozer@build-3-12-armv7) (gcc version 9.3.0 (Alpine 9.3.0)) #1-Alpine SMP Wed Dec 16 11:38:04 UTC 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 20 pages/cpu s49676 r8192 d24052 u81920
[ 0.000000] pcpu-alloc: s49676 r8192 d24052 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 modules=loop,squashfs,sd-mod,usb-storage quiet console=tty1
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 878344K/970752K available (8192K kernel code, 697K rwdata, 2620K rodata, 1024K init, 819K bss, 26872K reserved, 65536K cma-reserved)
[ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x38/0x4dc with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000023] Switching to timer-based delay loop, resolution 52ns
[ 0.000311] Console: colour dummy device 80x30
[ 0.000334] printk: console [tty1] enabled
[ 0.000391] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000408] pid_max: default: 32768 minimum: 301
[ 0.000731] LSM: Security Framework initializing
[ 0.000999] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001022] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002633] Disabling memory control group subsystem
[ 0.002809] CPU: Testing write buffer coherency: ok
[ 0.003447] CPU0: update cpu_capacity 1024
[ 0.003461] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.004461] Setting up static identity map for 0x100000 - 0x10003c
[ 0.004668] rcu: Hierarchical SRCU implementation.
[ 0.005382] smp: Bringing up secondary CPUs ...
[ 0.006651] CPU1: update cpu_capacity 1024
[ 0.006663] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.008021] CPU2: update cpu_capacity 1024
[ 0.008032] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.009289] CPU3: update cpu_capacity 1024
[ 0.009299] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.009445] smp: Brought up 1 node, 4 CPUs
[ 0.009458] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.009465] CPU: All CPU(s) started in HYP mode.
[ 0.009470] CPU: Virtualization extensions available.
[ 0.010671] devtmpfs: initialized
[ 0.025207] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.025887] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.025916] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.029607] pinctrl core: initialized pinctrl subsystem
[ 0.032246] NET: Registered protocol family 16
[ 0.035488] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.040909] audit: initializing netlink subsys (disabled)
[ 0.041253] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.044473] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.044485] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.044876] Serial: AMBA PL011 UART driver
[ 0.047498] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.070202] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-09-02 21:15, variant start
[ 0.080196] raspberrypi-firmware soc:firmware: Firmware hash is 4439d2aaa6c376a2d1ef4402f142e1cf4de37c43
[ 0.173061] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.177570] SCSI subsystem initialized
[ 0.178808] usbcore: registered new interface driver usbfs
[ 0.179024] usbcore: registered new interface driver hub
[ 0.179194] usbcore: registered new device driver usb
[ 0.183774] clocksource: Switched to clocksource arch_sys_counter
[ 1.278316] VFS: Disk quotas dquot_6.6.0
[ 1.278448] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.278643] FS-Cache: Loaded
[ 1.278993] CacheFiles: Loaded
[ 1.295208] thermal_sys: Registered thermal governor 'step_wise'
[ 1.295795] NET: Registered protocol family 2
[ 1.296858] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 1.296905] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 1.297034] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 1.297235] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.297432] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.297498] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.297865] NET: Registered protocol family 1
[ 1.298750] RPC: Registered named UNIX socket transport module.
[ 1.298760] RPC: Registered udp transport module.
[ 1.298767] RPC: Registered tcp transport module.
[ 1.298773] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.299167] Trying to unpack rootfs image as initramfs...
[ 1.558257] Freeing initrd memory: 3176K
[ 1.559412] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 1.563574] Initialise system trusted keyrings
[ 1.564023] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.579045] FS-Cache: Netfs 'nfs' registered for caching
[ 1.579988] NFS: Registering the id_resolver key type
[ 1.580030] Key type id_resolver registered
[ 1.580038] Key type id_legacy registered
[ 1.580059] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.581713] Key type asymmetric registered
[ 1.581726] Asymmetric key parser 'x509' registered
[ 1.581814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.581826] io scheduler mq-deadline registered
[ 1.581834] io scheduler kyber registered
[ 1.584450] bcm2708_fb soc:fb: FB found 1 display(s)
[ 1.617602] Console: switching to colour frame buffer device 210x65
[ 1.651312] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1680x1050
[ 1.656752] bcm2835-rng 3f104000.rng: hwrng registered
[ 1.657178] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.658173] vc-sm: Videocore shared memory driver
[ 1.658755] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 1.676821] brd: module loaded
[ 1.693093] loop: module loaded
[ 1.694870] Loading iSCSI transport class v2.0-870.
[ 1.696329] libphy: Fixed MDIO Bus: probed
[ 1.696512] usbcore: registered new interface driver lan78xx
[ 1.696632] usbcore: registered new interface driver smsc95xx
[ 1.696655] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.425013] Core Release: 2.80a
[ 2.425030] Setting default values for core params
[ 2.425079] Finished setting default values for core params
[ 2.625439] Using Buffer DMA mode
[ 2.625448] Periodic Transfer Interrupt Enhancement - disabled
[ 2.625454] Multiprocessor Interrupt Enhancement - disabled
[ 2.625465] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.625489] Dedicated Tx FIFOs mode
[ 2.626375] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = b7514000 dma = 0xf7514000 len=9024
[ 2.626412] FIQ FSM acceleration enabled for :
[ 2.626412] Non-periodic Split Transactions
[ 2.626412] Periodic Split Transactions
[ 2.626412] High-Speed Isochronous Endpoints
[ 2.626412] Interrupt/Control Split Transaction hack enabled
[ 2.626421] dwc_otg: Microframe scheduler enabled
[ 2.626486] WARN::hcd_init_fiq:457: FIQ on core 1
[ 2.626498] WARN::hcd_init_fiq:458: FIQ ASM at 8069a974 length 36
[ 2.626513] WARN::hcd_init_fiq:496: MPHI regs_base at bb810000
[ 2.626540] dwc_otg 3f980000.usb: DWC OTG Controller
[ 2.626589] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 2.626646] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 2.626694] Init: Port Power? op_state=1
[ 2.626700] Init: Power Port (0)
[ 2.627067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 2.627081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.627092] usb usb1: Product: DWC OTG Controller
[ 2.627103] usb usb1: Manufacturer: Linux 5.4.84-0-rpi2 dwc_otg_hcd
[ 2.627113] usb usb1: SerialNumber: 3f980000.usb
[ 2.628093] hub 1-0:1.0: USB hub found
[ 2.628221] hub 1-0:1.0: 1 port detected
[ 2.629587] dwc_otg: FIQ enabled
[ 2.629597] dwc_otg: NAK holdoff enabled
[ 2.629603] dwc_otg: FIQ split-transaction FSM enabled
[ 2.629727] Module dwc_common_port init
[ 2.630260] usbcore: registered new interface driver usb-storage
[ 2.630706] mousedev: PS/2 mouse device common for all mice
[ 2.632628] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 2.636583] sdhci: Secure Digital Host Controller Interface driver
[ 2.636593] sdhci: Copyright(c) Pierre Ossman
[ 2.637472] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 2.637721] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.639313] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.640497] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.640985] usbcore: registered new interface driver usbhid
[ 2.640994] usbhid: USB HID core driver
[ 2.642237] vchiq: vchiq_init_state: slot_zero = (ptrval)
[ 2.644276] [vc_sm_connected_init]: start
[ 2.654260] [vc_sm_connected_init]: end - returning 0
[ 2.656008] Initializing XFRM netlink socket
[ 2.656191] Key type dns_resolver registered
[ 2.656612] Registering SWP/SWPB emulation handler
[ 2.657160] registered taskstats version 1
[ 2.657187] Loading compiled-in X.509 certificates
[ 2.657703] Key type ._fscrypt registered
[ 2.657712] Key type .fscrypt registered
[ 2.668694] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 2.668835] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 2.671055] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 2.672607] sdhost: log_buf @ (ptrval) (f7513000)
[ 2.720426] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 2.723266] hctosys: unable to open rtc device (rtc0)
[ 2.723278] of_cfs_init
[ 2.723510] of_cfs_init: OK
[ 2.743446] Freeing unused kernel memory: 1024K
[ 2.779454] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.782024] mmc0: new high speed SDXC card at address 0001
[ 2.783246] mmcblk0: mmc0:0001 EC2QT 59.6 GiB
[ 2.786237] mmcblk0: p1 p2
[ 2.804149] Run /init as init process
[ 2.854080] Indeed it is in host mode hprt0 = 00021501
[ 2.940053] random: fast init done
[ 3.064008] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.064721] Indeed it is in host mode hprt0 = 00001101
[ 3.304616] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 3.304662] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.306126] hub 1-1:1.0: USB hub found
[ 3.306317] hub 1-1:1.0: 5 ports detected
[ 3.436006] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 3.436024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 3.623867] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.636497] EXT4-fs (mmcblk0p2): recovery complete
[ 3.661909] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.754458] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 3.754483] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.757963] smsc95xx v1.0.6
[ 3.849401] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:c7:34:e6
Since I followed all the instructions, my questions are: is there something more that I have to do in order to make it work? Did anybody get it work on 2B? I think yes since it is cited in the troubleshot section of the wiki, so I am missing definitely something.
