0

when using NoIR camera:

rapivid -v 

camera work but colour of frame varies with the lighting.

when using IR camera:

raspivid -v

resulting:

mmal: mmal_vc_component_enable: failed to enable component: ENOSPC mmal: camera component couldn't be enabled mmal: main: Failed to create camera component mmal: Failed to run camera app. Please check for firmware updates

I updated the firmware:

sudo apt-get update
sudo apt-get upgrade
sudo raspi-update

I have enabled camera from raspi-config

3
  • What do you get from a vcgencmd get_camera command? Run that then edit your question to include the results.
    – Dougie
    Commented Jan 21, 2021 at 8:03
  • vcgencmd get_camera gives supported=1 detected=1
    – Nitish Jha
    Commented Jan 22, 2021 at 4:32
  • I have two models of rpi camera C and H. C model is working. For H first I had to initilise raspberry pi with camera C and then when I connect H camera I start working but after reboot I again get into the same problem.
    – Nitish Jha
    Commented Jan 22, 2021 at 4:45

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.