I have already seen the other post but I want a python code through with I can connect my raspberry pi and ECG sensor ad8232 I am totally new to raspberry pi interfacing so I don't completely understand the datasheet of the sensor and how to extract important info from it and use it in python code so please help me I need it for my project please help
How to use Rpi python to read ADC8232 ECG module?
To continue, ...
Appendix A - Example Rpi Python ADC8232 Experiment Setup and Test Results
My first getting started test is measure my own heart's beating rate.
Appendix B - AD8232 ECG Datasheet Reading Summary/Log
I an now reading the datasheet again to refresh my memory, and also making a summary notes for Rpi ADC interface and circuit design.
Appendix C - SparkFun AD8232 ECG Module Schematic
On a Raspberry Pi400 with Arduino installed: You can use the widely available Arduino sketch for AD8232, then upload the Arduino ECG data to Python with Thonny or VSCode via serial, and store the ECG data as a txt file. This is an alternative to using SD cards with Arduino. You can also use the incoming ECG (via serial) on Python to control an LED or the pixels on the Pi Sense Hat. But the display of the ECG is better, I believe, in the Arduino serial plotter than it is with Matplotlib so I wouldn't waste any energy trying to plot the ECG with Python.