0

I have a LogiLink USB-C 3-Port Hub UA0315 plugged in Raspberry Pi 4 which is powered through external power supply. The hub is working when plugged in, however on reboot it is no longer detected until I manually re-plug it. RPi is running Ubuntu 18.04.

What I've tried so far:

  • adding dtoverlay=dwc2,dr_mode=host in /boot/firmware/usrcfg.txt and /boot/config.txt
  • loading modules dwc2 and ftdi_sio with modprobe
  • tried with newest Raspberry Pi OS, same problem

Additional info:

For testing purposes i have connected mouse to USB 3.0 hub slot, two USB 2.0 slots are connected to ODrive board.

2
  • Instead of physically replugging it, does udevadm trigger work? (use -v and -n for verbose and dry-run, if need be)
    – FelixJN
    Mar 5, 2021 at 13:13
  • Hi @FelixJN , running udevadm trigger yields no results. Output of udevadm trigger -v
    – Martin
    Mar 8, 2021 at 6:16

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.