0

I'm trying to connect the pi 4 model B to a phone that I bought off Amazon (https://www.amazon.ca/Wild-Wood-Phone-Retro-Design/dp/B00H20B2GM). This phone is not connected to a landline or anything as it's just sitting on my table for fun. I've gone through various tutorials and posts online. I'm really confused as I'm trying to play recorded audio files on the phone using the pi and also save audio on the pi using the phone handset. I think it would be a fun way to use these cool phones!

From what I've found so far, it looks like I might need a modem like this (https://www.usr.com/products/56k-dialup-modem/usr5637/) that I could use to send and receive audio using the pi to the phone. I need to connect the RJ11 cable to the Raspberry Pi and send and receive audio using that interface. Basically, I'm trying to play some audio on the phone when I lift the handset and then be able to record audio too! I think the USB might be too much.

Can someone please give me a few tips if any to help get this going? I'm new to all this so trying to figure it out. Thanks!

2
  • I would forget using the phone as a phone but use a speaker and mic to connect to the Pi. There are a few projects on the web using the Pi as an intercom - maybe a mod of github.com/PicoI2/raspberry-pi-intercom could give you a starting point? Also how about using it to host Ask Google / Alex or mycroft.ai
    – user130616
    Mar 8 at 3:47
  • I've thought about it but having the phone connected to the pi and using it for it's microphone and speaker is something I've been wanting to do for a while.
    – afern001
    Mar 8 at 3:53
1

What you erroneously refer to as a "RJ11 cable" is in fact a 8P8C modular connector and CAT5/6 cable.

The 8P8C connector on many Pi models is used for Ethernet over twisted pair. This uses a low voltage differential signalling system.

RJ11 uses a similar six-position modular connector but only 2 pins are used for a 50V analog telephony interface.

Most telephones actually use a 4P4C modular connector.

While the connectors may be physically similar, they are totally incompatible so what you ask is impossible.

The Pi has NO analog capability, apart from a PWM audio output.

2
  • So, it looks like I'll have to do something along these lines: Raspberry Pi-> Cross over cable -> ATA -> RJ11 -> phone. The ATA will help solve my Analog issue too.
    – afern001
    Mar 9 at 21:51
  • @afern001 I haven't the faintest idea what an "ATA" is but the task is impossible without extensive external hardware which is off topic.
    – Milliways
    Mar 9 at 21:57

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.