How can I configure usb port available in raspberry pi to OTG ?
-
If you skim through this you will find some links: raspberrypi.stackexchange.com/questions/100583/…– goldilocks ♦Jun 24, 2021 at 13:46
-
the TLDR of it is ... it's the USB C power port that can be OTG on the pi 4– Jaromanda XJun 25, 2021 at 2:27
-
did you read goldilocks link? do that– Jaromanda XJun 25, 2021 at 3:17
-
1@KA No, that isn't possible.– IngoJun 25, 2021 at 10:18
Add a comment
|
1 Answer
The USB2 OTG port is inside the USB-C connector so you may have to do some "special" hardware setup to use OTG Gadget mode, if you mean that. You can find more information at Where is the USB2 OTG port on the RPi 4 Model B located?. I may also be of interest How to make a splitter cable for the USB2 OTG port on the RPi 4B?.
