0

I am building my first project on a Raspberry Pi 3 using an RFID HAT for Raspberry Pi. I am using Windows 10 IOT Core. The manual for the RFID HAT begins with this:

I2C/Serial interface is disabled by default in Raspberry Pi, To enable it type below command.

sudo raspi-config

I get the response: 'sudo' is not recognized...

Loads of other 'sudo' commands follow. I have done some hunting on this. One post suggests using 'runat' - also not recognized. another suggests using 'elevate' - also not recognized.

Improve this question
1
  • I bet the whole manual is written with Linux in mind: it's not just about sudo. You won't get raspi-config on Windows either.
    – Dmitry Grigoryev
    Commented Aug 31, 2021 at 15:37

1 Answer 1

Reset to default
1

Forget Windows. It is NOT Linux. Use Raspberry Pi OS.

AFAIK Windows IOT is not currently supported.

Improve this answer
1
  • That works @Milliways. Now I am just going to have to rewrite the other half of the project in Python (storing the results using a Web Service). (Previously written in C#)
    – Simple Simon
    Commented Aug 31, 2021 at 11:33

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.