1

I acquired this interface with buttons for 2 players (http://www.arcadeoutlet.es/es/interfaces-jamma/27-jamma-to-usb-2p.html)

I follow this steps to connect my joysticks with raspberry pi (http:// angelverde.info/configuracion-avanzada-instalando-joystick-gamepad-karmic-koala/)

I have done all the steps to the calibration of dipositive. I recognized it as Bus 001 Device 009: ID 16c0: 05e1 VOTI CDC-ACM class devices (modems)

The fact is that to calibrate eg axis 0, my device only returns 1 when I move it to the right and 0 in the center and left. In the tutorial says it should return 0, 128 and 255. The axis 1 returns 1 when I move it down and 0 in all other cases.

This results in the mame me, I just work right, bottom and buttons. Left and above does not work.

In windows all joysticks and buttons works fine.

I have run jstest / dev/input/js0 me and detects all buttons and right / bottom of the two joysticks.

js call only detect 4 axis. But i have 2 joysticks:

Joystick has 4 axes and 22 buttons.
Correction for axis 0 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912
Correction for axis 1 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912
Correction for axis 2 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912
Correction for axis 3 is broken line, precision is 0.
Coeficients are: 0, 0, 536870912, 536870912

https://i.sstatic.net/orayC.jpg

Plug in/out the joystick retrieve this lines in syslog

Jan 31 01:10:54 raspberrypi kernel: [   48.458230] usb 1-1.3: USB disconnect, device number 5
Jan 31 01:10:57 raspberrypi kernel: [   51.253379] usb 1-1.3: new low-speed USB device number 6 using dwc_otg
Jan 31 01:10:57 raspberrypi kernel: [   51.360054] usb 1-1.3: New USB device found, idVendor=16c0, idProduct=05e1
Jan 31 01:10:57 raspberrypi kernel: [   51.360087] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 31 01:10:57 raspberrypi kernel: [   51.360104] usb 1-1.3: Product: THT Arcade console 2P USB Player
Jan 31 01:10:57 raspberrypi kernel: [   51.360119] usb 1-1.3: Manufacturer: THT
Jan 31 01:10:57 raspberrypi kernel: [   51.378515] input: THT THT Arcade console 2P USB Player as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
Jan 31 01:10:57 raspberrypi kernel: [   51.380388] hid-generic 0003:16C0:05E1.0004: input,hidraw2: USB HID v1.01 Joystick [THT THT Arcade console 2P USB Player] on usb-bcm2708_usb-1.3/input0
2
  • Sorry, I can't figure much of the spanish links. Nevertheless, I never heard of a joystick being enumerated as a modem. Please run tail -f /var/log/syslog in a terminal, plug the device in, and post whatever appear then. Additionnally your 2nd link is broken due to a space after http:// and I can't make an edit of less than 6 characters.
    – M Noit
    Jan 30, 2014 at 13:17
  • The 2nd link is a tutorial where they learn to calibrate joystick with jscal. I refresh my question with tail -f /var/log/syslog
    – 50l3r
    Jan 31, 2014 at 1:12

1 Answer 1

1

I found the solution

It's need to recompile raspbian's kernel with a drivers modified

http://www.raspberrypi.org/phpBB3/viewtopic.php?f=78&t=36564&start=25

Que bueno soy, y que culito tengo

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.