0

I have a Raspberry Pi 4 Model B and I am trying to connect the board with Raspberry Pi camera module. I made sure that the camera is connect correctly to the insertion slot. And the camera is enabled through both command line sudo raspy-config and the desktop Raspberry Pi configuration. However, when I do vcgencmd get_camera I see supported=0 detected=0. I don't understand how come the board doesn't support the camera?

Really appreciate the help!

Improve this question
3
  • Are you using Raspberry Pi OS Buster or Bullseye? Is that an official Pi camera - which model?
    – CoderMike
    Commented Nov 18, 2021 at 21:23
  • I am using RASPBERRY PI OS FULL 32-BIT downloaded from the rspi imager. This is where I get my camera abra-electronics.com/robotics-embedded-electronics/…
    – user16715189
    Commented Nov 18, 2021 at 22:55
  • The camera looks like a 3rd party product - similar to the "official" 5MP camera but not quite. So hard to say what sort of quality they are. Otherwise just double check the connector into the Pi socket really has the ribbon contacts around the right way.
    – Paul
    Commented Nov 21, 2021 at 7:42

0

Reset to default

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.