1

I have a pile of buttons and raspberry pi pico’s (I went a bit overboard when they went on sale), and wish to connect them to Google Home to control my devices.

Basically, I want each button to do a specific thing (Such as pressing button one will turn on device A, and pressing button two will turn it off) or for each button to control one device (So button one will simply change that status of Device A), whichever is easier.

I have searched the internet, but I have only found one instructable, and it focuses on the Raspberry Pi 3, and controlling Google with your voice, not a button.

At this point, I don't have any code, I just wish to know if this is even possible in the first place, and if it is, what directions would I need to follow?

Thanks in advance!

6
  • 1
    Of course, you'll need to figure out how google home will be able to "connect" to these Pico's
    – Bravo
    Dec 18, 2021 at 2:04
  • 1
    @Bravo, that is really the part I am stuck on. Do you have any suggestions? Dec 18, 2021 at 13:56
  • 1
    A more appropriate place to research that would be our larger parent site, Stack Overflow. But before you post there, keep in mind that people do not always react kindly to questions that scream, "I have done exactly zero research on this topic because I am hoping somebody else can use their time (rather than me wasting mine) to write me a simple introduction..." stackoverflow.com/questions/tagged/google-home
    – goldilocks
    Dec 18, 2021 at 14:23
  • 1
    WRT "Can I do this with a Pi Pico?" the answer is yes if it has a way to communicate onliine, which obviously requires some extra hardware and may mean it is not an appropriate device for your purpose.
    – goldilocks
    Dec 18, 2021 at 14:27
  • 1
    option 1: USB to serial. Option 2: serial -> wifi chip connected to Pico (i.e. ESP8266/32)
    – Bravo
    Dec 18, 2021 at 23:51

0

Browse other questions tagged or ask your own question.