I'm trying to install Webmin on raspberryOS bullseye 32bits (5.10.87-v7l+ kernel), and the installation get stuck on: "Unpacking webmin (1.983) ..."
I already try to install over 2 methods:
- Adding "deb https://download.webmin.com/download/repository sarge contrib" to "/etc/apt/sources.list"
- wget https://download.webmin.com/jcameron-key.asc
- apt-key add jcameron-key.asc
- apt-get install Webmin
And 2nd method:
- wget https://prdownloads.sourceforge.net/webadmin/webmin_1.983_all.deb
- dpkg --install webmin_1.983_all.deb
Both get exactly the same result. I try to install an old version (v1.920) over dpkg, I reach the end of installation with success. But when I try to upgrade in the webUI for v1.983 (because of security issues), I end with the same result: crash and I get a error:
Error. 500 - Perl execution failed - Undefined subroutine &main::authentic called
If I refresh the WebUI I get:
Error - Perl execution failed Undefined subroutine &WebminCore::theme_get_webprefix_local called at /usr/share/webmin/authentic-theme/authentic.pl line 1311. Compilation failed in require at /usr/share/webmin/webmin/upgrade.cgi line 5.
Later the only way to remove it from system is using:
$ dpkg --remove --force-remove-reinstreq webmin
Also I try to use apt to do the installation, and check the progress, but after 1 hour still stuck at 20%:
$ sudo apt install ./webmin_1.983_all.deb Reading package lists... Done Building dependency tree... Done Reading state information... Done Note, selecting 'webmin' instead of './webmin_1.983_all.deb' The following NEW packages will be installed: webmin 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/28.1 MB of archives. After this operation, 302 MB of additional disk space will be used. Get:1 /home/pi/webmin_1.983_all.deb webmin all 1.983 [28.1 MB] (Reading database ... 100909 files and directories currently installed.) Preparing to unpack /home/pi/webmin_1.983_all.deb ... Unpacking webmin (1.983) ... Progress: [ 20%] [###########...............................................]
Anyone facing the same problem with bullseye? There is another way to install it, like docker/portainer instead?