1

I am using my pi as an audio server with MPD. I am using an USB sound card (C-Media chip) which works fine quality wise. However, every time the "ACT" LED comes on sound gets distorted with a popping/crackle noise. This is very audible especially in more slow songs and happens every few seconds (depending on what software accesses the SD card I guess).

Is this a known problem? I was unable to find anything for this specific problem on the web. Is this more likely an electrical "interference" of some sort, or a software problem? I am using pulseaudio for output.

Any pointers would be appreciated, as this makes the pi unusable as an audio server.

2
  • Does the USB-card work well in other computers? Do your power supply supply enough power? Jun 17, 2015 at 7:47
  • This seems to be connected to a general USB problem on the original Raspberry PI. See this thread for a long disucssion. Jun 19, 2015 at 13:24

1 Answer 1

1

I have heard that the Pi can give network problems as soon as the CPU must do some extra work. The solution was to use a power-supply that had more power. Perhaps your problem is related to that. A LED (or the process that makes the LED light up) does not consume much but perhaps just enough to have a hiccup in the USB.

2
  • No, it's actually related to well known USB problem, as I found out. Jun 18, 2015 at 8:22
  • @ShellfishGene If that were the problem (the pi's USB controller), everyone using a USB sound card would likely have it. However, while there are quite a few questions here from people who are using USB sound cards, none of them have mentioned this problem previously.
    – goldilocks
    Jun 19, 2015 at 14:37

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.