0

I have a problem with the RaspberryPi. On a 128GB microsd I flashed Ubuntu Server 22.04 LTS (rpi Zero 2/3/4/400). The writing and validation of the microsd by the program Raspberry Pi Imager v1.7.2 happens without any surprises, but in the boot, I receive the following error on the Raspberry boot screen. Currently, only the red light turns out to be on without further complications regarding flashing/blinking. Can you help me?

   Trying partition: 0
    type: 32 lba: 2048 oem: 'mkfs.fat' volume: ' systemboot'
    rsc 32 fat-sectors 4033 c-count 516190 c-size 1
    root dir cluster 2 sectors 0 entries 0

//-- Error lines ->

Read config.txt bytes 1074 hnd 0x6eb
Read start4.elf bytes 2241504 hnd 0x13133
Read fixup4.dat bytes 5411 hnd 0x6fd
Firmware: d9b293558b4cef6aabedcc53c178e7604de90788 Nov 2021 16:16:49
0x00d03114    0x00000000 0x00000fff            
MEM GPU: 76   ARM: 948    TOTAL: 1024

After these few lines of logs that appear and disappear very quickly, I get a completely black screen

Improve this question
1
  • If you've got another uSD card, try that. Or try flashing RPi OS to the card you have & try to boot that. You didn't say what the ACT LED was doing... were you aware that the ACT LED flashes error codes for some boot failures? You should be trying to eliminate variables at this stage
    – Seamus
    Jul 19 at 6:54

0

Reset to default

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.