Having a few problems with the standard camera board.
- Images are heavily green-tinted: sample
- Anytime I try to use the raspistill -fp option, it takes about 20 seconds after the snapshot is taken for the desktop to respond to my input again.
I also just executed rpi-update to update the firmware, but no change (well the second problem seems to have improve a little). Command executed for the above snapshot:
raspistill -fp -q 100 -o rcapture.jpg
For the first problem, the camera seems kind of finicky. I often get travelling lines on the preview and it's heavily green tinted as you can see from the picture. I managed a properly coloured picture once or twice, but it doesn't seem reproducible now.
For the second problem, the first time and second time raspistill -fp is executed, it returns desktop control immediately. All subsequent times my mouse and keyboard don't respond for a good 10-15 secs, then I finally get control back. This also happens in preview only mode, ie. when not saving a picture. All I need to execute is "raspistill -fp" a few times to see this behaviour. When executing "raspistill -fp -k", it also doesn't quit when I type "x" and hit the enter key like it's supposed to (waited a good 30 seconds).
I've also tried two different regulated power supplies, same behaviour with each.
Anyone else having these problems or can suggest any solutions?