0

I am trying to Boot pi4 Board in Network boot without Sdcard for that i have done below steps

1 > sudo rpi-eeprom-config --edit and set as below

BOOT_ORDER=0xf21 - **Try SD first**, followed by **NETWORK then repeat**

2 > vcgencmd bootloader_config - > confirmed its set to 0xf21

3 > poweroff and removed SD card from SD card slot

4 > powerON

Observed boot order is set to 0x41 automatically , please guide me on how to boot without SD card in SD card Slot

Improve this question

1 Answer 1

Reset to default
0

I am able to Switch to Network boot for Pi4 B board be below Steps :

1 > Set EEPROM to Latest Version by setting in UI by command sudo raspi-config 2 > Set BOOT_ORDER=0xf21 3 > Set TFTP_IP=192.168.50.101 (server TFTP IP can be set any by user) 4 > Remove all files from /boot folder 5 > Reboot

the Client Device will Switch to Network boot as BOOT_ORDER=0xf21

0xf21

2 - Network mode Boot ( second priority from right to left) 1 - SD card Boot (first priority from right to left)

Improve this answer
1
  • if we want to switch to network boot mode without deleting files inside /boot then remove SD card and set BOOT_ORDER=0xf12 and restart after inserting SD card
    – abhi
    Commented Nov 6, 2023 at 3:57

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.