0

I am using raspberry pi 3B+ for a project. I have installed the bullseye which is currently the OLD STABLE. The raspbian mirror that I am using is: http://ftp.tsukuba.wide.ad.jp/Linux/raspbian/raspbian/ because some of the applications, it threw error of connection in the original raspbian mirror.

I have installed the following so far:

rustdesk GPIO library Adafruit library for Adc rtc settings

and i am running some services.

previously i used sandisk sd 32GB cards and it is working fine till now. Just few days back i am using hp SD cards and after running a day it stops . I have attached the picture below.

enter image description here

from another HP sd card I am getting something else. i have attached the picture below:

enter image description here

2
  • 1
    From what I can read of the rather poor image your SD Card is corrupt. It is (occasionally) possible to repair but the best option is to restore from your backup or re-install.
    – Milliways
    Commented Oct 21, 2023 at 7:54
  • I have done the same thing to another two HP sdcard and they also have crashed after working a day.
    – John Mist
    Commented Oct 22, 2023 at 8:32

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.