4

I just installed Raspbian Wheezy (2014-01-07-wheezy-raspbian.img) on my Raspberry Pi, connected it to my AirPort with an ethernet cable and booted it with this wifi dongle (Sitecom N300) inserted: Sitecom N300 stick

As you can see from the output of lsusb and dmesg, this dongle is using the RTL8191S chipset, which, as I'm told, should be supported in this version of Raspbian. However, there's no wlan* entry in iwconfig's output:

pi@raspberrypi ~ $ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

firmware-realtek was already installed, so what am I missing?

8
  • Are you sure the USB device is powered up? What if you try lsusb is it there?
    – Piotr Kula
    Mar 24, 2014 at 18:25
  • It is indeed there, it's listed as "Bus 001 Device 004: ID 0df6:006c Sitecom Europe B.V." in the Gist linked above.
    – emmalyx
    Mar 24, 2014 at 19:34
  • FWIW, the kernel version is 3.10.33.
    – emmalyx
    Mar 24, 2014 at 19:35
  • I just tried using the dongle with a powered USB hub, but the problem persists.
    – emmalyx
    Mar 26, 2014 at 22:12
  • I also have some problems with WiFi, bad connection when its at a distance, where my other devices work fine. Which version of the Pi do you have? I have the version 1.0, from the very first batches and experience some other problems that shouldn't be there. Try another USB WiFi if you got one? Or can borrow one, like realtek or something
    – Piotr Kula
    Mar 26, 2014 at 22:27

1 Answer 1

-2

You should check if wlan0 is mentioned in /etc/network/interfaces file

auto wlan0
allow-hotplug wlan0
iface wlan0 inet dhcp

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.