-2

I want to run a RPi Zero W on a crude solar panel and battery or supercapacitor.

I understand the pi has an input range of 80-120A or so, and needs a minimum of just 2 volts. This makes it ideal for me.

How can I set up the Zero W to power down if the voltage gets too low, or turn on once the voltage reaches a certain threshold, and continues running, say once clouds dissipate?

Are there any guides on this? How straight forward is it? I understand electronics, but my knowledge of the RPi is limited.

Thanks

7
  • 1
    Your facts are wrong. Recommeded current capacity is 1.2Amps. Voltage is 5V. github.com/raspberrypi/documentation/blob/develop/documentation/…
    – CoderMike
    Mar 29 at 8:22
  • @CoderMike then how come this link says it can consume as little as 80mA? jeffgeerling.com/blogs/jeff-geerling/raspberry-pi-zero-power
    – Jodes
    Mar 29 at 8:34
  • First you have to design your power management circuitry (which is likely to cost many times the cost of a PiZero) including voltage detection because the Pi has none. Once you have done this ask a question about how to shutdown the Pi using your detector.
    – Milliways
    Mar 29 at 8:47
  • Thanks. I'm not concerned about the power management circuit. That should be easy. I just dont know how to interface the signals with the RPi and configure it to react accordingly. How to signal it to shut down, and how to revive it.
    – Jodes
    Mar 29 at 8:57
  • 1
    You have obviously done little research. It is simple to shutdown - there are hundreds of posts. The Pi will automatically boot when power is restored.
    – Milliways
    Mar 29 at 9:46

1 Answer 1

0

I've done the same thing: running an RPi from a battery charged by a solar cell. Due to the fact that the only way to achieve zero power consumption is by removing power (true for all RPi), I designed a simple circuit to accomplish that. The design requires addition of a Real Time Clock (RTC), and use of two overlays in /boot/config.txt.

There's a schematic and more details in this answer, but this answer didn't include the RTC... if you're interested & can't find the other answers, let me know & I'll try to help.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.