1

Refrigerator

This is a follow up to my previous question here.

My chest freezer came in yesterday, and I brewed two batches of homebrew and placed them in last night. This morning, I couldn't wait any longer so I put my RPi in the fridge and connected the DS18B20 temperature probes into the fermenting wort.

When I run my fingers against one of the walls of the refrigerator, I can detect a good bit of moisture.

How can I protect against the moisture in the refrigerator?

Improve this question
5
  • if you have a cable to power the pi into the refridgerator, then why don't you place the pi outside and connect only the sensor?
    – Gotschi
    May 4, 2014 at 23:55
  • @Gotschi each RPi will have 5 DS18B20 temperature probes measuring the temperature of beer, and these probes are not long enough for me to situate the RPi outside of the refrigerator.
    – Matthew Moisen
    May 5, 2014 at 2:35
  • then make them longer? all you need is to solder 3 wires ;)
    – Gotschi
    May 5, 2014 at 11:18
  • Why not just get an air-tight case?
    – Moshe Katz
    May 11, 2014 at 3:51
  • Also see raspberrypi.org/forums/viewtopic.php?f=40&t=57428
    – Moshe Katz
    May 11, 2014 at 3:54

0

Reset to default

Browse other questions tagged or ask your own question.