3

I'm doing this beginners project with a motion sensor and a pi camera. With this I'll make a security camera. Since the SD card is really large on memory (compared to a HDD) I want the pi to send all my images/videos to my main (Windows 7) PC. I was thinking of a shared folder on the main PC, I do know how to make a shared folder on windows. But how do I do 'upload' images to this folder from the raspberry pi? Or are there better ways to do this. The Pi is connected to a LAN network.

2

Install SAMBA

sudo apt-get install samba

Then create a directory in your mnt folder, and mount your Windows share to the folder. Make sure your windows share allows ananoymous or myuser read and write without password

su (make sure you do this as root)
mkdir /mnt/linky_share
mount -t cifs -o user=myuser //192.168.1.104/share /mnt/samba_share
<enter>

This mount will only last until reboot - So once you get it right open the file /etc/fstab and add the line

//192.168.1.104/share /mnt/samba_share smbfs username=myuser 0 0
  • I have disabled passwords for shared folders but when I use this command: mount -t cifs -o user=pi //IPadress-PC/foldername /mnt/linky_share (i've changed it a bit so you can also check if I use the command correctly) but then it asks for a password – SjonTeflon Jun 9 '14 at 9:01
  • @sweer edit your /etc/samba/smb.conf and replace the security = user line as security = share then restart samba service. – gurcanozturk Jun 10 '14 at 20:03
  • @gurcanozturk I figured out the password part but now it gives me an error: Error(115): Operation now in progress – SjonTeflon Jun 14 '14 at 21:19
  • @SWeer are you running a firewall on PC or RPi? – gurcanozturk Jun 21 '14 at 12:12
  • only one thing. When I want to write a file to /mnt/linky_share with python (running IDLE as root ofc) I get a permission denied. So I do not have the rights to make a new file or directory in this directory – SjonTeflon Jun 27 '14 at 15:59
2

You can create a shared directory on Windows in the normal way. (If you don't know how to do this the Pi site is not the best place to ask).

The Pi can connect to the shared directory via SMB (Samba). You will find lots of discussion on this. One tutorial http://www.raspberrypihelp.net/tutorials/12-mount-a-samba-share-on-raspberry-pi

If you have more specific questions clarity your question.

0

Access your windows shared folders on the RPI using mount command.
Everything well explained in this link.

Note: I getting "no such file or directory" errors until I realized it's better edit etc/fstab file and then run mount command.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.