1

I have tried 2-3 times to follow instructions similar to this post :

http://docs.kali.org/armel-armhf/install-kali-linux-arm-raspberry-pi

EXCEPT I have only a class 4 SD Card on hand.

source image is at http://www.offensive-security.com/kali-linux-vmware-arm-image-download/

My problem is, I plug everything in, put in the power and... one quick green LED, then solid red. No Screen, no terminal, nothing.

Should I try again, or is class 10 really the only way to get this particular distro to load?

I've successfully used this same card over and over again, using NOOBS to install Debian.

Update/Edit : turns out I may need to revert the kernel back .. and load from the ARM image..

http://www.raspberrypi.org/forums/viewtopic.php?f=28&t=82931

This is for the B+ only.

1 Answer 1

0

Update/Edit : turns out I may need to revert the kernel back .. and load from the ARM image..

http://www.raspberrypi.org/forums/viewtopic.php?f=28&t=82931

This is for the B+ only.

git clone https://github.com/offensive-security/kali-arm-build-scripts
cd kali-arm-build-scripts
sed -i 's/3.13.y/3.12.y/g' rpi.sh
./build-deps.sh
yes "" | ./rpi.sh 1.3.3.7

After it's done building the compressed image will be located at kali-arm-build-scripts/rpi-1.3.3.7/kali-1.3.3.7-rpi.img.xz

2
  • Can this be done from a mac?
    – clankill3r
    Mar 2, 2017 at 16:45
  • I believe I did this on OSX, yes.. been a while but sed might be the only question mark part of the commands
    – Erik
    Mar 10, 2017 at 2:41

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.