I need to disable the framebuffer running on
/dev/fb0 via the
bcm2708_fb kernel module (reason: some tool I use must run on
/dev/fb0 and I need my small TFT to be just that -
bcm2708_fb in the kernel leads to a few errors during kernel compilation which I like to forego.
I there a known way to
bcm2708_fb in the kernel but
b) not load it, thus leaving
/dev/fb0 unpopulated until I load my small TFT framebuffer driver?
According to the source of
bcm2708_fb there's no parameters not to load the driver when compiled as a module, according to multiple sources I googled there's no way of not loading a compiled-in driver.
Any help would be highly appreciated.