On the Raspberry Pi there are two components about an inch long, one next to the ethernet and one next to the logo. I have been wondering since I received the device what these components are?
These are the components I'm referring to.
13
14
According to this diagram, they are your CSI and DSI connectors, for camera and display, respectively.
answered Jun 13 '12 at 22:46
-
Ah I see, I did not realise they were I/O, but now I see that the black tops can actually lift up. Thanks for the help, I had always presumed the JTAG headers were for the camera/display modules! – Shane Hudson Jun 13 '12 at 22:48
-
For anyone interested, it seems the JTAG headers that I referred to are used to give access to the chip, although they require data files that we do not yet have access to. raspberrypi.stackexchange.com/q/263/38 – Shane Hudson Jun 13 '12 at 22:53
-2
Camera & display ribbon cable slots. FYI the display ribbon cable slots in correctly only one way. The camera connection will accept the ribbon cable either way!
-
3
