1

I need to find IP address of my Raspberry PI to further use in Putty, I have connected the ethernet. I made changes in cmdline.text file of the Raspbian wheezy OS, allocated IP address to it (ip=169.254.210.40::169.254.210.55), based on IP v-4 address of my ethernet adapter was (169.254.210.55) which all I followed from a video on youtube. When I tried to ping the address no response came. Hence I am doing something wrong.

All I want is to run my pi on laptop, I have putty and Xming installed but without knowing the IP of pi I can't proceed further. Also this is the first boot( I mean I have not installed anything using a monitor and HDMI)
DESPERATELY NEED HELP!!!

1
  • 169.254 is a link local address which is not going to work en.wikipedia.org/wiki/169.254 You need to use an address of your network. If you use the standard Pi setup it will find one from DHCP.
    – Milliways
    Feb 19, 2015 at 22:25

1 Answer 1

1

Try this:

nmap -O -T4 169.254.210.40-55

You will recognize the Raspberry Pi through the MAC address which should be recognized as Raspberry Pi Foundation - See:

Starting Nmap 6.40 ( http://nmap.org ) at 2015-02-19 19:05 CET
Nmap scan report for 10.0.0.5
Host is up (0.00056s latency).
Not shown: 998 closed ports
PORT      STATE SERVICE
22/tcp    open  ssh
MAC Address: B8:27:EB:AE:36:D7 (Raspberry Pi Foundation)
No exact OS matches for host (If you know what OS is running on it, see
http://nmap.org/submit/ ).
1
  • As per my answer above this will not work with a link local address (unless the Pi is directly connected to the PC), and even then there are other problems.
    – Milliways
    Feb 21, 2015 at 11:25

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.