I am using OpenElec and XBMC on Raspberry Pi A+. I have an IR Remote and Receiver that works out of the box on B+
But on my A+, it does not work when I connect the receiver directly to the single USB Port Or through a USB Hub.
it at least gets detected when I connect it directly. Output of
Bus 001 Device 010: ID 1d57:ad02 Xenta SE340D PC Remote Control
But when I connect it through a USB Hub it does not even get detected.
This thread tells that it could be the USB port that is the problem, But I have 2 problems:
- The Reciever works when i connect it to the USB Hub on a B+. The problem is only with A+
- Though it gets detected when connected directly, it does not work on the XBMC. I am using the Same SD Card on both the devices.
Steps to debug this will be of great help.